Category:620 Pavement Marking
Revision as of 15:54, 5 March 2015 by Smithk (talk | contribs) (→Pavement Marking Guidelines: Per Traffic, replaced "All Classifications" chart heading with "Intersection Markings" as a clarification)
Pavement Marking Guidelines
| Divided Highways | Undivided Highways | Intersection Markings | ||
|---|---|---|---|---|
| Contractor Installations | High Build Paint with Type L Beads | Waterborne Paint with Type P Beads | Type 2 tape | |
| MoDOT Installations | Major Roads – shall be striped annually unless retroreflectivity exceeds requirements for new pavement markings1 | Waterborne Paint with Type L beads (60° and rising) | Waterborne Paint with Type PM beads (60° and rising) | Type 2 tape, preformed thermoplastic or waterborne paint with Type PM beads |
| Regionally Significant Roads – shall be striped annually unless retroreflectivity exceeds requirements for new pavement markings1 | Not applicable | Waterborne Paint with Type PM beads (50° and rising) or Cold weather paint with Type PM beads (35° to 50°) | ||
| Minor Roads≥400 AADT – maximum of 50% striped annually | ||||
| Minor Roads<400 AADT – maximum of 33.3% striped annually | ||||
| Surface Treatments | ||||
| 1 See Pavement Marking Acceptance Table | ||||
Articles in "620 Pavement Marking"
The following 14 pages are in this category, out of 14 total.
6
- 620.1 General (MUTCD Chapter 3A)
- 620.2 Pavement and Curb Markings (MUTCD Chapter 3B)
- 620.3 Roundabout Markings (MUTCD Chapter 3C)
- 620.4 Markings for Preferential Lanes (MUTCD Chapter 3D)
- 620.5 Delineators (MUTCD Chapter 3F)
- 620.6 Colored Pavements
- 620.7 Channelizing Devices Used for Emphasis or Pavement Marking Patterns
- 620.8 Islands
- 620.9 Rumble Strip Markings
- 620.10 Operational Procedures and Safety
- 620.11 Guidelines for Using Water-Borne Traffic Paint
- 620.12 Construction Inspection for Sec 620
- 620.13 Measurement of Retroreflectivity by Handheld Retroreflectometers
- 620.14 3M Installation Contract
