Difference between revisions of "Category:714 Tube Type Aluminum Rail Laboratory Testing Guidelines"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (minor clarification)
m (→‎714.2 Sample Record: updated link)
 
Line 10: Line 10:
  
 
===714.2 Sample Record===
 
===714.2 Sample Record===
The sample record shall be completed in SiteManager and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.9 Reporting Test Results|EPG 106.9 Reporting Test Results]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results for bolts and nuts shall be reported on the appropriate templates under the Tests tab.
+
The sample record shall be completed in SiteManager and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in [[106.20 Reporting|EPG 106.20 Reporting]], are to be included in the remarks to clarify conditions of acceptance or rejection. Test results for bolts and nuts shall be reported on the appropriate templates under the Tests tab.

Latest revision as of 13:31, 1 July 2010

This article establishes procedures for Laboratory testing and reporting samples of galvanized steel bolts, nuts and washers for use in the installation of aluminum rail.

714.1 Procedure

714.1.1 Chemical Tests

The weight (mass) of coating of bolts, nuts and washers shall be determined, when requested, according to AASHTO M232. Original test data and calculations shall be recorded in Laboratory workbooks.

714.1.2 Physical Tests

Steel bolts and nuts shall be tested according to EPG 712.3.2.2 Physical Tests - Bolts and Nuts . Test results and calculations are to be recorded through SiteManager.

714.2 Sample Record

The sample record shall be completed in SiteManager and shall indicate acceptance, qualified acceptance, or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection. Test results for bolts and nuts shall be reported on the appropriate templates under the Tests tab.