|
|
| Line 1: |
Line 1: |
| | ==773.1 Maintenance Planning Guideline for Installing Pipe Liners== | | ==773.1 Maintenance Planning Guideline for Installing Pipe Liners== |
| − | See [[:Category:735 Culvert Pipe Liner|Culvert Pipe Liner]]
| + | '''Printable''' [[media:R319 - Install Pipe Liners.pdf|'''Maintenance Planning Guide for Installing Pipe Liners''']]. |
| − | ==773.2 Maintenance Planning Guideline for Cleaning and Repair of Pipes==
| |
| − | {|style="padding: 0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="160px" align="right"
| |
| − | |-
| |
| − | |'''Code:''' R319
| |
| − | |} | |
| − | '''Definition''' | |
| | | | |
| − | The time and expenses incurred from removing and replacing pipe culverts. Includes time and expenses incurred for installing a new lining in an existing culvert.
| + | Index of all [[:Category:170 Maintenance Activity Planning Guidelines#Index of Printable Planning Guides|Maintenance Planning Guidelines]]. |
| | | | |
| − | '''Purpose'''
| + | ==773.2 Maintenance Planning Guideline for Cleaning and Repair of Pipes== |
| − | | + | '''Printable''' [[media:R319 - Clean & Repair Pipe & Box Culverts - Pipe Culverts.pdf|'''Maintenance Planning Guide for Cleaning and Repair of Pipes''']]. |
| − | To clean, align, and repair pipe culverts and related structures.
| |
| − | | |
| − | '''Scheduling'''
| |
| − | | |
| − | As needed, year around.
| |
| − | | |
| − | '''Recommended Equipment''' | |
| − | | |
| − | *Trucks
| |
| − | *Water Tank w/Trash Pump
| |
| − | *Concrete Mixer
| |
| − | *Jack
| |
| − | *Loader
| |
| − | *Skid Steer Loader
| |
| − | *Chainsaws
| |
| − | *Tube Flusher
| |
| − | Traffic Control Equipment (see [[616.23 Traffic Control for Field Operations|Traffic Control for Field Operations]])
| |
| − | | |
| − | '''Recommended Material'''
| |
| − | | |
| − | *Concrete
| |
| − | *Plastic Joint Compound
| |
| − | *Form Material
| |
| − | *Water
| |
| − | *Curing Compound
| |
| − | | |
| − | '''Recommended Procedure'''
| |
| − | | |
| − | 1. Call Dig Rite and MoDOT to check for utilities.
| |
| − | | |
| − | 2. Place traffic control devices as needed.
| |
| − | | |
| − | 3. Fill open joints with joint compound.
| |
| − | | |
| − | 4. If headwall, flared end section, or pipe end section is settled, align section with jack or loader and compact material under section for support.
| |
| − | | |
| − | 5. If ends of corrugated metal pipe are bent and restricted, open with jack.
| |
| − | | |
| − | 6. Clean excess compound and debris from work area.
| |
| − | | |
| − | 7. Remove traffic control devices.
| |
| − | | |
| − | '''Safety''' | |
| − | | |
| − | Call before you dig to locate utilities '''(1-800-DIG-RITE)'''. Watch out for "pinch points." Wear all appropriate PPE. Reference the [http://lnapp1/RI/RIManual.NSF/SHToC?OpenView Safety Policies, Rules & Regulations-Employee Handbook.]
| |
| | | | |
| − | '''Other Considerations'''
| + | Index of all [[:Category:170 Maintenance Activity Planning Guidelines#Index of Printable Planning Guides|Maintenance Planning Guidelines]]. |
| − | | |
| − | Check if Corps of Engineers permit is needed.
| |
| | | | |
| | ==773.3 Maintenance Planning Guideline for Cleaning and Repair of Box Culverts== | | ==773.3 Maintenance Planning Guideline for Cleaning and Repair of Box Culverts== |
| − | {|style="padding: 0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="160px" align="right"
| + | '''Printable''' [[media:R319 - Clean & Repair Pipe & Box Culverts - Box Culverts.pdf|'''Maintenance Planning Guide for Cleaning and Repair of Box Culverts''']]. |
| − | |-
| |
| − | |'''Code:''' R319
| |
| − | |}
| |
| − | '''Definition'''
| |
| − | | |
| − | The time and expenses incurred from removing and replacing pipe culverts. Includes time and expenses incurred for installing a new lining in an existing culvert.
| |
| − | | |
| − | {|style="padding: 0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#ffddcc" width="210px" align="right"
| |
| − | |-
| |
| − | |'''Concrete Box Culvert, GFRP'''
| |
| − | |-
| |
| − | |[http://library.modot.mo.gov/RDT/reports/RI99028/RDT01016a.pdf Report 2001]
| |
| − | |-
| |
| − | |'''See also:''' [http://www.modot.gov/services/OR/byDate.htm Innovation Library] | |
| − | |}
| |
| − | | |
| − | '''Purpose'''
| |
| − | | |
| − | To clean, repair, and fill voids of box culverts and restore roadway drainage.
| |
| − | | |
| − | '''Scheduling''' | |
| − | | |
| − | As needed, year around.
| |
| − | | |
| − | '''Recommended Equipment'''
| |
| − | | |
| − | *Trucks
| |
| − | *Loader, Backhoe, or Excavator
| |
| − | *Concrete Mixer
| |
| − | *Compressor/Breakers
| |
| − | *Water Tank w/Trash Pump
| |
| − | *Traffic Control Equipment (see [[616.23 Traffic Control for Field Operations|Traffic Control for Field Operations]])
| |
| − | | |
| − | '''Recommended Material'''
| |
| − | | |
| − | *Concrete
| |
| − | *Water
| |
| − | *Quarry Run Rock
| |
| − | *Form Material
| |
| − | *Cement
| |
| − | *Agricultural Lime
| |
| − | | |
| − | '''Recommended Procedure'''
| |
| − | | |
| − | 1. Call Dig Rite and MoDOT to check for utilities.
| |
| − | | |
| − | 2. Place traffic control devices as needed.
| |
| − | | |
| − | <u>Clean Out</u>
| |
| − | | |
| − | 1. Remove drift and debris as needed.
| |
| − | | |
| − | <u>Repair</u>
| |
| − | | |
| − | 1. Remove bad concrete, form, and pour concrete.
| |
| − | | |
| − | <u>Fill Voids</u>
| |
| − | | |
| − | 1. Fill large voids and eroded outlet areas with quarry run rock and if needed grout with concrete.
| |
| − | | |
| − | 2. Internal voids along the barrel sides and bottom should be mudjacked.
| |
| − | | |
| − | 3. Remove traffic control devices.
| |
| − | | |
| − | '''Safety'''
| |
| − | | |
| − | Call before you dig to locate utilities '''(1-800-DIG-RITE)'''. Watch out for "pinch points." Wear all appropriate PPE. Reference the [http://lnapp1/RI/RIManual.NSF/SHToC?OpenView Safety Policies, Rules & Regulations-Employee Handbook.]
| |
| | | | |
| − | '''Other Considerations'''
| + | Index of all [[:Category:170 Maintenance Activity Planning Guidelines#Index of Printable Planning Guides|Maintenance Planning Guidelines]]. |
| − | | |
| − | Check if Corps of Engineers permit is needed.
| |
| | | | |
| | ==773.4 Maintenance Planning Guideline for Replacing Pipes and Box Culverts== | | ==773.4 Maintenance Planning Guideline for Replacing Pipes and Box Culverts== |
| − | {|style="padding: 0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="160px" align="right"
| + | '''Printable''' [[media:R319 - Replace Pipe & Box Culverts.pdf|'''Maintenance Planning Guide for Replacing Pipe & Box Culverts''']]. |
| − | |-
| |
| − | |'''Code:''' R319
| |
| − | |} | |
| − | '''Definition''' | |
| − | | |
| − | The time and expenses incurred from removing and replacing pipe culverts. Includes time and expenses incurred for installing a new lining in an existing culvert.
| |
| − | | |
| − | '''Purpose'''
| |
| | | | |
| − | To replace deteriorated pipe and box culverts, which have caused the roadway or entrance to settle.
| + | Index of all [[:Category:170 Maintenance Activity Planning Guidelines#Index of Printable Planning Guides|Maintenance Planning Guidelines]]. |
| − | | |
| − | '''Scheduling'''
| |
| − | | |
| − | As needed, year around.
| |
| − | | |
| − | '''Recommended Equipment'''
| |
| − | | |
| − | *Trucks
| |
| − | *Backhoe, Excavator, Loader, or Motorgrader
| |
| − | *Mechanical Compactor
| |
| − | *Dragline
| |
| − | *Crane
| |
| − | *Breaker
| |
| − | *Trenching Protective System/ Sheeting
| |
| − | *Traffic Control Equipment (see [[616.23 Traffic Control for Field Operations|Traffic Control for Field Operations]])
| |
| − | | |
| − | '''Recommended Material'''
| |
| − | | |
| − | *Pipe & Accessories
| |
| − | *Joint Compound
| |
| − | *Roadway Surface Material
| |
| − | *Precast Box Culvert
| |
| − | *Backfill Material
| |
| − | | |
| − | '''Recommended Procedure'''
| |
| − | | |
| − | 1. Call Dig Rite and MoDOT to check for utilities.
| |
| − | | |
| − | 2. Develop trenching safety plan with competent person and supervisor.
| |
| − | | |
| − | 3. Place traffic control devices as needed.
| |
| − | | |
| − | 4. Remove existing pipe or box.
| |
| − | | |
| − | 5. Install protective system in trench, if necessary.
| |
| − | | |
| − | 6. Prepare subgrade.
| |
| − | | |
| − | 7. Place new pipe or box and seal joints.
| |
| − | | |
| − | 8. Remove protective system.
| |
| − | | |
| − | 9. Compact material in lifts around and over pipe or box.
| |
| − | | |
| − | 10. Place and compact surfacing material.
| |
| − | | |
| − | 11. Clean work area.
| |
| − | | |
| − | 12. Remove traffic control devices.
| |
| − | | |
| − | '''Safety'''
| |
| − | | |
| − | Call before you dig to locate utilities (1-800-DIG-RITE). Hard hats are required. Watch for sharp edges and "pinch points." Wear all appropriate PPE. Refer to Risk Management On Line Manual Section 2.4 for [http://lnapp1/RI/RIManual.NSF/2cfd1a8d7c4213d7862562d900795ea7/c997dd19e850254f86256df60052ada1?OpenDocument Trenching and Shoring Procedures.] Also comply with the [http://lnapp1/RI/RIManual.NSF/SHToC?OpenView Safety Policies, Rules & Regulations-Employee Handbook.]
| |
| − | | |
| − | '''Other Considerations'''
| |
| − | | |
| − | If entire roadway is to be closed, local news media, schools, emergency services, and law enforcement agencies should be informed in advance.
| |
| − | | |
| − | '''References'''
| |
| − | | |
| − | Standard Specification [http://modot.mo.gov/business/standards_and_specs/Sec0725.pdf Sec 725], [http://modot.mo.gov/business/standards_and_specs/Sec0726.pdf Sec 726] and [http://modot.mo.gov/business/standards_and_specs/Sec0733.pdf Sec 733].
| |
| − | | |
| − | {|
| |
| − | |[[Image:773 Replacing Pipe and Box Culverts1.jpg|400px]] || [[Image:773 Replacing Pipe and Box Culverts2.jpg|400px]]
| |
| − | |-
| |
| − | |text align="center"|'''Sawcut Pavement for Culvert Replacement''' || text align="center"|'''Open Trench for Culvert Replacement'''
| |
| − | |-
| |
| − | |[[Image:773 Replacing Pipe and Box Culverts3.jpg|400px]] || [[Image:773 Replacing Pipe and Box Culverts4.jpg|400px]]
| |
| − | |-
| |
| − | |text align="center"|'''Setting Grade for Culvert Bedding''' || text align="center"|'''Fine Grading Culvert Bed'''
| |
| − | |-
| |
| − | |[[Image:773 Replacing Pipe and Box Culverts5.jpg|400px]] || [[Image:773 Replacing Pipe and Box Culverts6.jpg|400px]]
| |
| − | |-
| |
| − | |text align="center"|'''Laying Culvert Pipe''' || text align="center"|'''Installing Pipe Connecting Band'''
| |
| − | |-
| |
| − | |[[Image:773 Replacing Pipe and Box Culverts7.jpg|400px]] || [[Image:773 Replacing Pipe and Box Culverts8.jpg|400px]]
| |
| − | |-
| |
| − | |text align="center"|'''Backfilling around Culvert Pipe''' || text align="center"|'''Spreading and Compacting Pipe Fill'''
| |
| − | |-
| |
| − | |[[Image:773 Replacing Pipe and Box Culverts9.jpg|400px]] || [[Image:773 Replacing Pipe and Box Culverts10.jpg|400px]]
| |
| − | |-
| |
| − | |text align="center"|'''Laying Hot Mix Asphalt''' || text align="center"|'''Finished Product'''
| |
| − | |}
| |
| | | | |
| | ==773.5 Maintenance Planning Guideline for Cleaning and Reshaping Earth Ditches== | | ==773.5 Maintenance Planning Guideline for Cleaning and Reshaping Earth Ditches== |
| − | {|style="padding: 0.3em; margin-left:15px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="160px" align="right"
| + | '''Printable''' [[media:R316 - Clean & Reshape Ditches - Earth.pdf|'''Maintenance Planning Guide for Cleaning and Reshaping Earth Ditches''']]. |
| − | |-
| |
| − | |'''Code:''' R316
| |
| − | |}
| |
| − | '''Definition'''
| |
| − | | |
| − | The time and expenses incurred for the installation, repair and maintenance of roadway drainage ditches, structures, and all slide repairs. This includes installing and maintaining pavement drainage systems.
| |
| − | | |
| − | '''Purpose'''
| |
| − | | |
| − | To keep the roadbed dry and maintain stability and proper drainage while keeping culvert pipes open.
| |
| − | | |
| − | '''Scheduling'''
| |
| − | | |
| − | As needed, year around.
| |
| − | | |
| − | '''Recommended Equipment'''
| |
| − | | |
| − | *Motor Grader
| |
| − | *Loader
| |
| − | *Backhoe, Excavator, or Dragline
| |
| − | *Dump Trucks
| |
| − | *Broadcast Spreader
| |
| − | *Eye Level &/or Transit
| |
| − | *Traffic Control Equipment (see [[616.23 Traffic Control for Field Operations|Traffic Control for Field Operations]])
| |
| − | | |
| − | '''Recommended Material'''
| |
| − | | |
| − | *Seed
| |
| − | *Mulch
| |
| − | *Silt Fence, Straw Bales, Rock (for Berms), Triangular Silt Dyke, Coir Fiber Logs
| |
| − | *Sod
| |
| − | *Erosion Control Blankets
| |
| − | | |
| − | '''Recommended Procedure'''
| |
| − | | |
| − | 1. Call Dig Rite and check for MoDOT utilities.
| |
| − | | |
| − | 2. Place traffic control devices as needed.
| |
| − | | |
| − | 3. Shape ditch and remove material as needed.
| |
| − | | |
| − | 4. Clean loose material from roadway.
| |
| − | | |
| − | 5. Set up erosion control as necessary.
| |
| − | | |
| − | 6. Seed and mulch as necessary.
| |
| − | | |
| − | 7. Remove traffic control devices.
| |
| − | | |
| − | '''Safety''' | |
| − | | |
| − | Call before you dig to locate utilities ('''1- 800-DIG-RITE'''). Watch for traffic when operating equipment on the roadway. Wear all appropriate PPE. Also comply with the [http://lnapp1/RI/RIManual.NSF/SHToC?OpenView Safety Policies, Rules & Regulations-Employee Handbook.]
| |
| − | | |
| − | '''Other Considerations'''
| |
| − | | |
| − | When excavating in lawn areas, adjacent property owners should be contacted prior to beginning work, if possible, to explain intent of operation.
| |
| − | | |
| − | '''References'''
| |
| − | | |
| − | Standard Specification [http://modot.mo.gov/business/standards_and_specs/Sec0802.pdf Sec 802], [http://modot.mo.gov/business/standards_and_specs/Sec0803.pdf Sec 803], [http://modot.mo.gov/business/standards_and_specs/Sec0805.pdf Sec 805], [http://modot.mo.gov/business/standards_and_specs/Sec0806.pdf Sec 806] and Standard Plan [http://modot.mo.gov/business/standards_and_specs/documents/80610.pdf 806.10.]
| |
| | | | |
| − | {|
| + | Index of all [[:Category:170 Maintenance Activity Planning Guidelines#Index of Printable Planning Guides|Maintenance Planning Guidelines]]. |
| − | |[[Image:773 Clean and Reshape Earth Ditches1.jpg|400px]] || [[Image:773 Clean and Reshape Earth Ditches2.jpg|400px]]
| |
| − | |-
| |
| − | |text align="center"|'''Downstream Culvert Ditch (Silted In)''' || text align="center"|'''Digging Out Culvert Ditch'''
| |
| − | |-
| |
| − | ||[[Image:773 Clean and Reshape Earth Ditches3.jpg|400px]] || [[Image:773 Clean and Reshape Earth Ditches4.jpg|400px]]
| |
| − | |-
| |
| − | |text align="center"|'''Digging Out Culvert Ditch''' || text align="center"|'''Digging Out Culvert Ditch'''
| |
| − | |-
| |
| − | ||[[Image:773 Clean and Reshape Earth Ditches5.jpg|400px]] || [[Image:773 Clean and Reshape Earth Ditches6.jpg|400px]]
| |
| − | |-
| |
| − | |text align="center"|'''Graded Culvert Ditch''' || text align="center"|'''Mulched and Seeded Ditch - Finished Product'''
| |
| − | |}
| |
