Difference between revisions of "Category:902 Signals"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (added link)
m (Per TS, minor clarifications)
 
(5 intermediate revisions by the same user not shown)
Line 3: Line 3:
 
Traffic signals are electrically powered traffic control devices that warn or direct vehicular and pedestrian traffic to take some specific action.  Traffic signals provide for the orderly assignment of right of way to conflicting traffic movements at intersections.
 
Traffic signals are electrically powered traffic control devices that warn or direct vehicular and pedestrian traffic to take some specific action.  Traffic signals provide for the orderly assignment of right of way to conflicting traffic movements at intersections.
  
Traffic signals are not a complete solution for traffic problems.  Traffic signals can sometime create additional congestion and cause additional delay to vehicles if improperly designed, installed, or maintained.  Correctly designed and operated traffic signals installed at [[902.2 Warrants for Traffic Signal Installation| warranted locations]] will provide for the orderly movement of traffic, increase the intersection capacity, and in some instances, tend to reduce accidents.  [[902.7 Coordination|Coordinating]] and [[902.5 Phasing and Timing the Signal|phasing and timing signals]] are very important.  
+
Traffic signals are not a complete solution for traffic problems.  Traffic signals can sometime create additional congestion and cause additional delay to vehicles if improperly designed, installed, or maintained.  Correctly designed and operated traffic signals installed at [[902.3 Traffic Control Signal Needs Studies (MUTCD Chapter 4C)| warranted locations]] will provide for the orderly movement of traffic, increase the intersection capacity, and in some instances, tend to reduce accidents.  [[902.5 Traffic Control Signal Features (MUTCD Chapter 4D)#902.5.5 Coordination|Coordinating]] and [[902.5 Traffic Control Signal Features (MUTCD Chapter 4D)#902.5.36 Signal Timing|timing signals]] are very important.  
 +
 
 +
Traffic signals are listed on the [[121.3 The Statewide Transportation Improvement Program (STIP)|Statewide Transportation Improvement Program (STIP)]] in the description of the type of improvement if there is a probability of future signal control.  If signals cannot be justified, they are to be eliminated from the program at the earliest possible date.
 +
 
 
{|style="padding: 0.3em; margin-right:10px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="160px" align="left"  
 
{|style="padding: 0.3em; margin-right:10px; border:2px solid #a9a9a9; text-align:center; font-size: 95%; background:#f5f5f5" width="160px" align="left"  
 
|-
 
|-
Line 10: Line 13:
 
|[[media:900 Traffic Signals.pdf|Traffic Signals]]
 
|[[media:900 Traffic Signals.pdf|Traffic Signals]]
 
|}
 
|}
 +
The policies, standards and guidelines set forth herein are in general accordance with [http://mutcd.fhwa.dot.gov/index.htm the ''Manual on Uniform Traffic Control Devices''] most recent edition and the subsequent rulings on requests for interpretations, changes, and experimentation, herein referred to as the ''MUTCD''.  Clarification, elaboration, or the elimination of options of the individual items, is contained herein so that conformity of application will be promoted in Missouri. 
  
Traffic signals are listed on the Highway Right of Way and Construction Program in the description of the type of improvement if there is a probability of future signal control.  If signals cannot be justified, they are to be eliminated from the program at the earliest possible date.
+
There are many aspects to be considered when inspecting construction quality and this article provides [[902.19 Construction Inspection Guidelines for Sec 902|construction inspection guidelines]] and [[902.20 Material Inspection for Sec 902|guidelines for material inspections]].  
 
 
This article provides the [[902.1 Basis for Installation|basis for installation]] of traffic signals, discusses [[902.3 Basic Types of Signal Control| basic types of signal control]] equipment and hardware, their characteristics, uses, applications, [[902.8 Signal Operations and Maintenance|operations and maintenance]].  The policies, standards and guidelines set forth herein are in general accordance with [http://mutcd.fhwa.dot.gov/pdfs/2003r1/pdf-index.htm the ''Manual on Uniform Traffic Control Devices''] most recent edition and the subsequent rulings on requests for interpretations, changes, and experimentation, herein referred to as the ''MUTCD''.  Clarification, elaboration, or the elimination of options of the individual items, is contained herein so that conformity of application will be promoted in Missouri. 
 
 
 
There are many aspects to be considered when inspecting construction quality and this article provides [[902.13 Construction Inspection Guidelines for Sec 902|construction inspection guidelines]] and [[902.14 Material Inspection for Sec 902|guidelines for material inspections]].  
 
 
 
This article has a [[902.12 Glossary|glossary]] and also relates to:
 
 
 
- [[902.4 Installation of Equipment by Others|installation of equipment by others (including flashers and signals for schools and other special applications)]]
 
 
 
- [[902.6 Signal Indications and Signing|signal indications and signing]]
 
 
 
- [[902.9 Computer Applications|computer applications]]
 
 
 
- [[902.10 Signal Installations and Equipment| signal installations and equipment]]
 
 
 
- [[902.11 Other Design Aspects of Traffic Signals|other design aspects of traffic signals]]
 
  
- [[902.16 The Mobility Plan – Effective Arterial Management|effective arterial management]].
+
This article also has a [[902.18 Glossary|glossary]].
  
 
===Nonstandard Structures===
 
===Nonstandard Structures===
 +
{|style="padding: 0.3em; margin-right:7px; border:1px solid #a9a9a9; text-align:center; font-size: 95%; background:#ffddcc" width="210px" align="right"
 +
|-
 +
|'''Adaptive Traffic Signals'''
 +
|-
 +
|[http://library.modot.mo.gov/RDT/reports/Ri08026/or10020.pdf Evaluation of an Adaptive Traffic Signal System:  Route 291 in Lee's Summit]
 +
|-
 +
|'''See also:''' [https://www.modot.org/research-publications Research Publications]
 +
|}
  
If any lighting installation being considered will use a special or nonstandard structure or with dimensions exceeding those shown in the Standard Plans, [http://wwwi/intranet/tr/ Traffic] and [http://wwwi/intranet/br/default.htm Bridge] are to be consulted early in the project planning regarding the installation’s feasibility and necessary contract provisions.  Examples of this situation are [[901.7 Light Source and Intensity#901.7.6 High Mast Lighting|high mast lighting]] and exceeding lengths on the Standard Plans.  
+
If any lighting installation being considered will use a special or nonstandard structure or with dimensions exceeding those shown in the Standard Plans, [http://sharepoint/systemdelivery/tr/Pages/default.aspx Traffic] and [http://sharepoint/systemdelivery/br/pages/default.aspx Bridge] are to be consulted early in the project planning regarding the installation’s feasibility and necessary contract provisions.  Examples of this situation are [[901.7 Light Source and Intensity#901.7.6 High Mast Lighting|high mast lighting]] and exceeding lengths on the Standard Plans.  
  
 
Since designing details for nonstandard installations is typically performed by an outside engineer employed by the contractor or producer and is certified to MoDOT, the project contract documents must include appropriate requirements about the design standards used.  Since structures beyond MoDOT's standard designs are involved, a performance-based specification of the design signed and sealed by a Missouri Registered Professional Engineer is needed from the contractor.  Certification to the current AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaries and Traffic Signals including the latest fatigue provisions is required.
 
Since designing details for nonstandard installations is typically performed by an outside engineer employed by the contractor or producer and is certified to MoDOT, the project contract documents must include appropriate requirements about the design standards used.  Since structures beyond MoDOT's standard designs are involved, a performance-based specification of the design signed and sealed by a Missouri Registered Professional Engineer is needed from the contractor.  Certification to the current AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaries and Traffic Signals including the latest fatigue provisions is required.

Latest revision as of 14:52, 18 August 2020

902 signals.jpg

Traffic signals are electrically powered traffic control devices that warn or direct vehicular and pedestrian traffic to take some specific action. Traffic signals provide for the orderly assignment of right of way to conflicting traffic movements at intersections.

Traffic signals are not a complete solution for traffic problems. Traffic signals can sometime create additional congestion and cause additional delay to vehicles if improperly designed, installed, or maintained. Correctly designed and operated traffic signals installed at warranted locations will provide for the orderly movement of traffic, increase the intersection capacity, and in some instances, tend to reduce accidents. Coordinating and timing signals are very important.

Traffic signals are listed on the Statewide Transportation Improvement Program (STIP) in the description of the type of improvement if there is a probability of future signal control. If signals cannot be justified, they are to be eliminated from the program at the earliest possible date.

Traffic Pamphlet
Traffic Signals

The policies, standards and guidelines set forth herein are in general accordance with the Manual on Uniform Traffic Control Devices most recent edition and the subsequent rulings on requests for interpretations, changes, and experimentation, herein referred to as the MUTCD. Clarification, elaboration, or the elimination of options of the individual items, is contained herein so that conformity of application will be promoted in Missouri.

There are many aspects to be considered when inspecting construction quality and this article provides construction inspection guidelines and guidelines for material inspections.

This article also has a glossary.

Nonstandard Structures

Adaptive Traffic Signals
Evaluation of an Adaptive Traffic Signal System: Route 291 in Lee's Summit
See also: Research Publications

If any lighting installation being considered will use a special or nonstandard structure or with dimensions exceeding those shown in the Standard Plans, Traffic and Bridge are to be consulted early in the project planning regarding the installation’s feasibility and necessary contract provisions. Examples of this situation are high mast lighting and exceeding lengths on the Standard Plans.

Since designing details for nonstandard installations is typically performed by an outside engineer employed by the contractor or producer and is certified to MoDOT, the project contract documents must include appropriate requirements about the design standards used. Since structures beyond MoDOT's standard designs are involved, a performance-based specification of the design signed and sealed by a Missouri Registered Professional Engineer is needed from the contractor. Certification to the current AASHTO Standard Specifications for Structural Supports for Highway Signs, Luminaries and Traffic Signals including the latest fatigue provisions is required.