Difference between revisions of "Category talk:626 Rumble Strips"

From Engineering_Policy_Guide
Jump to navigation Jump to search
(New page: Is there a preferred location of where to begin/end the rumble strip for a ramp? Does it need to be placed on the acceleration or deceleration lane? We have seen locations where it stops...)
 
m
 
Line 1: Line 1:
Is there a preferred location of where to begin/end the rumble strip for a ramp?  Does it need to be placed on the acceleration or deceleration lane?  We have seen locations where it stops where the auxiliary lane is added, but does it make more sense to take it closer to the gore?   
+
Is there a preferred location of where to begin/end the rumble strip for a ramp?  Does it need to be placed on the acceleration or deceleration lane?  We have seen locations where it stops where the auxiliary lane is added, but does it make more sense to take it closer to the gore?  Thanks.
  
Thanks.
+
[[USER:smithk|Keith L. Smith:]]  The response from Traffic:  I would say since we are dealing with rumble strips, edgelines of the mainline roadway, they should begin and end at the taper of the off/on ramps and at the transition between the gore striping and the edgeline stripe.
 +
[[image:626 talk.jpg|center|950px]]

Latest revision as of 08:16, 1 February 2013

Is there a preferred location of where to begin/end the rumble strip for a ramp? Does it need to be placed on the acceleration or deceleration lane? We have seen locations where it stops where the auxiliary lane is added, but does it make more sense to take it closer to the gore? Thanks.

Keith L. Smith: The response from Traffic: I would say since we are dealing with rumble strips, edgelines of the mainline roadway, they should begin and end at the taper of the off/on ramps and at the transition between the gore striping and the edgeline stripe.

626 talk.jpg