|Useful information on how to search for info in the EPG: Searching the Engineering Policy Guide|
|Want help on how to update your EPG guidance? It is available at EPG Approval Process.|
|The Electronic MoDOT Spec Book for Mobile Devices is now available. You may also sign up for E-Update notices. To receive notices regarding Engineering Policy Revisions, select "Engineering Policy" then mark the appropriate subjects of interest.|
|RECENT POLICY CHANGES IN THE EPG|
MoDOT has made great strides to build a good transportation system and increase taxpayers' trust in its ability to deliver what was promised. Innovative concepts, such as Practical Design and design-build, were used to deliver those commitments and have made MoDOT a leader in the transportation industry.
These forward-thinking, innovative concepts are reflected in the ENGINEERING POLICY GUIDE (EPG). This document provides a single reference for all engineering and engineering-related guidance by combining the former Right of Way, Design, Bridge, Construction, Traffic and Maintenance manuals.
MediaWiki, the engine behind the Wikipedia on the World Wide Web, is the software delivering the EPG. Millions of hits on the EPG endorse this format to be easy to navigate and pleasing to read. A small HELP ARTICLE is included to assist with helpful hints on how to use the EPG as well as other points of interest.
10/16/18: In EPG 718.104.22.168 End Bent Reinforcement, the bending diagrams were revised to accommodate safety barrier reinforcement. A reinforcing clearance note in H10a. Conventional-Formed Barrier standard notes was added to avoid possible confusion when placing barrier reinforcement at end bents.
10/11/18: This article has been extensively revised to reflect current procedures.
10/10/18: This new Test Method is now available.
10/10/18: This article has been re-titled. Also, the requirement for the formed underseal access hole for the concrete bridge approach slabs has been eliminated.
9/25/18: Guidance about which certified payrolls are required for rental equipment operators was clarified.
Bridge Survey Checklist
9/24/18: Guidance about the Bridge Survey Checklist was clarified in EPG 238.3.36 Bridge Surveys, EPG 722.214.171.124 Bridge Survey Report, EPG 747.2.3 Bridge Survey Sheet Data, EPG 7126.96.36.199 Profile Sheets and EPG 7188.8.131.52.2.6 Other Bridges.
9/20/18: Additional guidance is now available for district staff on when to include a Change in Route Marking Report.
9/20/18: Guidance has been added to permit a new clause in the lease.
Saw Cut Joints
8/31/18: Guidance in EPG 7184.108.40.206 Joint Details, EPG 7220.127.116.11 Plastic Waterstop and EPG H10. Barrier Curbs – Safety, Median, Type C and D was revised to allow saw cut joints for conventional-formed barrier curbs.
8/27/17: Guidelines related to MAP-21 have been provided to bring guidance up to current practice.
8/16/18: Guidance has been added to EPG 106.9 Buy America Requirement clarifying when Buy America applies to manufactured items.
8/14/18: Clear zone guidance has been clarified and associated figures have been updated.
8/14/18: In EPG 756 Seismic Design, updated this flowchart to include, among other changes, new superstructure replacement guidance.
8/13/18: EPG 231.8 is now coordinated with Green Book guidance that clear bridge widths shall be the same as the approach roadway widths for collectors, arterials and freeways.
8/7/18: All of EPG 806 (except for EPG 806.8 SWPPP) has been completely rewritten to clarify land disturbance requirements and policies necessary to comply with MoDOT's current land disturbance practices.
8/7/18: Sand barrel impact attenuator setup will now be based on the manufacturer's recommendations instead of MoDOT's standard plans. Work zone durations have been revised. New guidance clarifies when the flashing arrow panel and lights on the TMA should be active.
Work Zone Duration and TA-35 Mobile Operation
8/7/18: Guidance was clarified in EPG 616.7.2 Work Duration and EPG 618.104.22.168.1 Duration of Work about which traffic control devices are needed based on the work duration. TA-35 was updated to include an additional TMA with added guidance for which operations TA-35 can be used.
7/27/18: Information for Projects of Division Interest (PoDI) has been updated for FY19.
7/25/18: Guidance was updated to make bidding documents more easily accessible. Reference to archaic plan sheet dgn file procedures were deleted.
6/29/18: New guidance clarifies how REs should administer payment for mobilization.
6/28/18: Comments about MoDOT acquiring property from the Univ. of MO and Dept. of Conservation were added.
6/26/18: Guidance was clarified with current business practices.
6/5/18: ASTM F1554 Grade 105 anchor bolts may be used when Grade 55 is not adequate.
6/1/18: Note B3.2 was clarified.