|Useful information on how to search for info in the EPG: Searching the Engineering Policy Guide|
|Want help on how to update your EPG guidance? It is available at EPG Approval Process.|
|The Electronic MoDOT Spec Book for Mobile Devices is now available. You may also sign up for E-Update notices. To receive notices regarding Engineering Policy Revisions, select "Engineering Policy" then mark the appropriate subjects of interest.|
|Our mission is to provide a world-class transportation system that is safe, innovative, reliable|
and dedicated to a prosperous Missouri.
|RECENT POLICY CHANGES IN THE EPG|
MoDOT’s three pillars of “Safety, Service and Stability” steer our leadership and employees. Our commitment to safety includes keeping both customers and ourselves safe. Our service includes providing outstanding customer service, delivering transportation solutions of great value and using resources wisely. Keeping roads and bridges in good condition, operating a reliable and convenient transportation system, and advancing Missouri’s economic development reflect our commitment to stability.
Innovative concepts, such as Practical Design and design-build, are used to deliver our commitments. These and other forward-thinking concepts shape the content of the ENGINEERING POLICY GUIDE (EPG). This document provides a single reference for all engineering and engineering-related Bridge, Construction, Design, Maintenance, Planning, Right of Way and Traffic guidance.
5/28/19: New guidance is now available for Post-Award Value Engineering (PAVE) workshops, processes and project selections.
5/28/19: The spacing between the long-term rumble strips was increased to "10 to 12 feet" for a greater area of effectiveness.
Median Crossover on a Divided Highway, TA-39
5/28/19: In EPG 616.8 Typical Applications, TA-39 for Design and Construction was revised to require Directional Indicator Barricades for tapers. The concrete barrier has been removed on sheet 2. Instead of the concrete barrier, an approved, temporary and crashworthy device can be used.
5/21/19: The most recent costs for non-contractual items is now presented in EPG 237.6 Estimates.
5/17/19: Guidance for pile design procedure was clarified in several articles including EPG 702 Load-Bearing Piles, EPG 7220.127.116.11 Types of Piling, EPG 751.3 Structural Steel Design Properties and EPG 751.36 Driven Piles.
5/10/19: This new guidance is for districts to be able to provide consultants with needed technical information.
4/30/19: Guidance has been updated to current practice.
4/24/19: The membership constituting the ODA Informal Hearing Review Committee was updated.
4/22/19: Guidance was clarified, particularly in "calculation of camber (upward)","calculations of deflections (downward)" and "creep coefficient".
4/11/19: This new Test Method is now available.
4/10/18: This new Test Method is now available.
4/5/19: Guidance now permits an Asst. District Engineer to approve Right of Way plans.
Steel Girder Galvanizing Procedure
3/27/19: Guidance was added in EPG 751.50 Standard Detailing Notes for Nonweathering Steel Structures and EPG 718.104.22.168 Protective Coating Requirements to clarify steel girder galvanizing procedure.
3/21/19: Guidance about the frequency for rice dry-back testing when sample results are very consistent was corrected to one every fourth sublot.
3/15/19: This new tutorial is now displayed in EPG 152 Contactor Bonding Responsibilities.
3/14/19: New types of DMSs are now referenced as a good portion of this article was updated.
3/12/19: Guidance in EPG 722.214.171.124 Embedment Requirements was updated with a minor note stating the Corps of Engineers must validate whether a stream is "ephemeral".
3/6/19: Guidance was clarified to allow the minimum offer to be reduced if approved by the Asst. to State Design Engineer – Right of Way.
3/1/19: Guidelines were clarified to provide a more standardized process.
3/1/19: Several ODA policies were updated to current practice, especially in EPG 236.16.22 Monthly Reports.
2/27/19: Guidance has been revised to coordinate with current practice.
2/25/19: Guidance about providing a reason for extending the contract has been added.
2/22/19: Guidance about erosion control for temporary pipe and temporary construction crossings was clarified.
2/14/19: The new AWP MA Adding New Concrete Mix Design QRG is now available.
2/13/19: The Solicitation and Request letter has been updated.