Recent Policy Changes in the EPG
9/30/20: EPG 108.16 has been rewritten to reflect the move to AWP.
9/28/20: Dowel requirements for inverted U-shape precast coping for large block (panel) MSE walls in Standard Note J1.21a were clarified.
9/23/20: New Note H7.8.2 is available when requiring epoxy-mastic primer coating on galvanized drain support brackets that come in contact with weathering steel beams/girders.
9/22/20: Guidance has been clarified and updated to current practice.
9/16/20: Guidance has been updated to reflect current practice.
9/16/20: Guidance has been updated to clarify pile uplift design requirements for pile cap footing and to implement DSB-16-02 requirements.
9/16/20: Contractor-furnished borrow guidance has been updated to current practice.
9/11/20: Guidance has been updated to reflect changes in the Section 106 processes that have incrementally occurred over the last few years.
9/2/20: This new guidance provides clarification for the process.
8/20/20: Guidance has been updated to current Environmental Change Orders instructions.
Bolt Specs and Welding Inspection
8/18/20: Bolt specs have been corrected to the latest ASTM and welding inspection procedures have been clarified in numerous articles including EPG 712.1.5 High Strength Bolts, EPG 751.14 Steel Superstructure and EPG 751.50, H3f. Pot Bearing Pad Assembly and new guidance in EPG 1080.2 Fabrication Inspection Shipment Releases (FISRs).
8/13/20: The list of agreements were revised to include a column with applicable MHTC policies. Archaic contracts were deleted.
8/13/20: Brief, new guidance has been added to make CFR requirements more apparent.
8/12/20: The signature requirements for contracts have been updated.
8/12/20: Guidance for the request process was clarified. Owners were informed that the request may be denied if they do not provide the necessary documentation.
8/7/20: Guidance was updated to reflect current practice concerning asphalt type. Asphalt designation for minor roads is now shown on roadway plans.
8/3/20: Guidance was updated to include the Change in Route Marking Report shall be submitted to Central Office Highway Safety and Traffic for processing.
8/3/20: The signature requirements for contracts have been updated.
7/31/20: The signature requirements for 3 contracts have been updated.
7/30/20: Guidance about the renewal application process has been clarified.
7/30/20: Fig. 903.5.21.1, Example of Application of Regulatory Signing and Pavement Markings at an Exit Ramp Termination to Deter Wrong-Way Entry, was updated to reflect current practice.
7/29/20: It is now permissible to not show the State Plane Coordinates on the Coordinate Point Sheet and the Reference Point Sheet.
7/29/20: A general re-write of this article has updated it to reflect current practice.
7/24/20: Guidance was revised and updated to reflect current practice and law.
7/17/20: New guidance is now available to clarify goals and expectations for the use of law enforcement services.