Talk:903.6 Warning Signs

From Engineering_Policy_Guide
Revision as of 15:18, 29 January 2010 by Wassma1 (talk | contribs)
Jump to navigation Jump to search

Under section 903.6.59, there's a link to Section 903.13.22, but the link only takes you to section 903.13, instead of to the subsection. Any way that link could take you directly to the section it references?

Also, while I was typing this, I wanted to refer to the page for reference, but I can't view both the discussion and page at the same time. And, I had to scroll all the way to the top of the page to switch to the discussion tab. Could the page/discussion/create/watch tabs be "frozen" at the top of the screen while we scroll through the text? Could it possible to view the discussion tab in a sepearte window, maybe at the bottom of the screen?

Keith L. Smith: I like the way you think. First, you located a link to a figure that only linked to the EPG article (we refer to EPG articles to avoid confusion with specs, which are referred to as sections) and got with us to correct it. Thanks - and your suggestion has been implemented. Second, you have a cool, techy idea that might be a convenience. Unfortunately, freezing the tabs would be a major change that our technical gura says might not be feasible. In this case, the cool, techy idea will have to be indefinitely postponed.

On Table 903.6.3 Warning Sign Sizes, page 2, the two low clearance signs are listed differently than they are in section 903.6.23. Low Clearance (Educational Plaque) is listed as W12-2B in the table, and W12-2a in the text. The Overhead Low Clearance Sign is listed as W12-3 in the table, and W12-2p in the text. Also confusing things, the Overhead low clearance sign is W12-2a in the 2009 MUTCD, with a size of 78"x24", whereas our sign is listed as 66 x 24 (*72 x 24). Anything that can be done to help clear this up would be appreciated.