Difference between revisions of "Category:106 Control of Material"

From Engineering Policy Guide
Jump to: navigation, search
(info from materials manual)
m (article construction)
Line 1: Line 1:
 
[[image:106.jpg|right|400px]]
 
[[image:106.jpg|right|400px]]
 +
 +
This article contains guidelines for Construction and Materials functions, including information from the former Construction and Materials Manual, Volumes 1-3.
 +
 +
For '''field inspection guidance''', refer to EPG “Construction Inspection Guidelines” articles for the specific spec number desired.  For example, [[616.18 Construction Inspection Guidelines for Sec 616|616.18 Construction Inspection Guidelines for Sec 616]] is the article for temporary traffic control.  Additional field inspection guidelines are located in the EPG 1100 Maintenance Materials group of articles, such as [[:Category:1106 Carbide-Tipped Snowplow Blades|Category:1106 Carbide-Tipped Snowplow Blades]].
 +
 +
'''Laboratory testing guidelines''', like the field inspection guidelines, are located in “Laboratory Testing Guidelines” articles for the specific spec number desired.  For example, [[1029.5 Laboratory Testing Guidelines for Sec 1029|1029.5 Laboratory Testing Guidelines for Sec 1029]] pertains to fabricating prestressed concrete members for bridges.  Additional laboratory testing guidelines are located in the EPG 1100 Maintenance Materials group of articles, such as [[:Category:1124 Sodium Chloride#1124.4 Laboratory Testing Guidelines|1124.4 Laboratory Testing Guidelines]].
 +
 +
The '''Automation Guide''' is available through [[106.10 Automation of Material Procedures|106.10 Automation of Material Procedures]].
 +
 +
'''Payment documentation''' is available at [[:Category:109.1 Payment Documentation Manual|109.1 Payment Documentation Manual]].
 +
 +
MoDOT’s '''Test Methods''' are located at [[:Category:106.7 Material Inspection Test Methods|106.7 Material Inspection Test Methods]].
 +
 +
MoDOT's '''pre-qualified or pre-established lists''' are located at [[106.1 Approved and Pre-Qualified Lists|106.1 Approved and Pre-Qualified Lists]].  Guidance for pre-acceptance lists (PAL) and the PAL Inspection Guide is available at [[106.2 Pre-Acceptance Lists (PAL)|106.2 Pre-Acceptance Lists (PAL)]].  New product evaluation information and forms are located at [[106.19 New Product Evaluation| 106.19 New Product Evaluation]].
 +
 +
The [http://www.modot.mo.gov/business/materials/pdf/TechCert/TechContent.pdf '''Technician Certification Program'''] includes a wide variety of information from how to become certified, to certification manuals to math topics.
 +
 +
The '''General Sections''' of the former Construction and Materials Manual are also available, including [[:category:132 Safety|safety]], [[106.4 Calibrations|calibrations]], [[106.5 Sampling|sampling]], [[106.6 Internal Records|internal records]], [[106.8 Certifications|certifications]], [[106.9 Reporting Test Results|reporting test results]], [[106.11 Summary of Materials Inspected|summary of materials inspected]], [[106.13 Material Inspection Revisions|guideline revisions]], [[106.15 Pipe Shipping Report Form|Pipe Shipping Report Form]], [[106.16 Special Designs|special designs]], [[106.17 Product Requirements for Temporary Traffic Control Devices, Pavement Marking and Delineation|product requirements for temporary traffic control devices, pavement marking and delineation]] and [[106.12 Other Items|other items]].
 +
 +
Inspection guidelines for the [[903.21 Material Inspection for Sec 903#903.21.4 Missouri Logo Sign Program|Missouri Logo Sign Program]], formerly included in the former Construction and Materials Manual, is available.
 +
 +
===Abbreviations and definitions===
  
 
Abbreviations and definitions used in 106 Control of Material include:
 
Abbreviations and definitions used in 106 Control of Material include:
Line 9: Line 31:
 
'''Certification''', A document issued by a company wherein they certify that material is in accordance with the specification. Explicit requirements are shown in [[106.8 Certifications|106.8 Certifications]].
 
'''Certification''', A document issued by a company wherein they certify that material is in accordance with the specification. Explicit requirements are shown in [[106.8 Certifications|106.8 Certifications]].
  
'''District''', One of ten geographical areas of the State of Missouri administered by a District Engineer of MoDOT.
+
'''District''', One of ten geographical areas of the state of Missouri administered by a District Engineer of MoDOT.
  
 
'''FTMS''', Federal Test Method Standards
 
'''FTMS''', Federal Test Method Standards
Line 15: Line 37:
 
'''Material''', The substance or substances incorporated in the construction or maintenance of highway structures, bridges and incidentals.
 
'''Material''', The substance or substances incorporated in the construction or maintenance of highway structures, bridges and incidentals.
  
'''Purchase Order''', The notice to a supplier that the bid has been accepted and that the supplier may proceed to deliver the material or perform the service specified in the bid request. The purchase order further informs Department personnel to proceed with inspection, if required and acceptance.
+
'''Purchase Order''', The notice to a supplier that the bid has been accepted and that the supplier may proceed to deliver the material or perform the service specified in the bid request. The purchase order further informs MoDOT personnel to proceed with inspection, if required and acceptance.
  
 
'''Quotation''', A statement, in writing, by a supplier that materials or services needed by MoDOT will be supplied at a certain price.
 
'''Quotation''', A statement, in writing, by a supplier that materials or services needed by MoDOT will be supplied at a certain price.
  
See Sec 101 for any abbreviation or definition not listed above.
+
Refer to [http://www.modot.mo.gov/business/standards_and_specs/Sec0101.pdf Sec 101] for any abbreviation or definition not listed above.

Revision as of 10:54, 8 February 2008

106.jpg

This article contains guidelines for Construction and Materials functions, including information from the former Construction and Materials Manual, Volumes 1-3.

For field inspection guidance, refer to EPG “Construction Inspection Guidelines” articles for the specific spec number desired. For example, 616.18 Construction Inspection Guidelines for Sec 616 is the article for temporary traffic control. Additional field inspection guidelines are located in the EPG 1100 Maintenance Materials group of articles, such as Category:1106 Carbide-Tipped Snowplow Blades.

Laboratory testing guidelines, like the field inspection guidelines, are located in “Laboratory Testing Guidelines” articles for the specific spec number desired. For example, 1029.5 Laboratory Testing Guidelines for Sec 1029 pertains to fabricating prestressed concrete members for bridges. Additional laboratory testing guidelines are located in the EPG 1100 Maintenance Materials group of articles, such as 1124.4 Laboratory Testing Guidelines.

The Automation Guide is available through 106.10 Automation of Material Procedures.

Payment documentation is available at 109.1 Payment Documentation Manual.

MoDOT’s Test Methods are located at 106.7 Material Inspection Test Methods.

MoDOT's pre-qualified or pre-established lists are located at 106.1 Approved and Pre-Qualified Lists. Guidance for pre-acceptance lists (PAL) and the PAL Inspection Guide is available at 106.2 Pre-Acceptance Lists (PAL). New product evaluation information and forms are located at 106.19 New Product Evaluation.

The Technician Certification Program includes a wide variety of information from how to become certified, to certification manuals to math topics.

The General Sections of the former Construction and Materials Manual are also available, including safety, calibrations, sampling, internal records, certifications, reporting test results, summary of materials inspected, guideline revisions, Pipe Shipping Report Form, special designs, product requirements for temporary traffic control devices, pavement marking and delineation and other items.

Inspection guidelines for the Missouri Logo Sign Program, formerly included in the former Construction and Materials Manual, is available.

Abbreviations and definitions

Abbreviations and definitions used in 106 Control of Material include:

AOAC, Association of Official Agricultural Chemists

Bid Request or Bid Proposal, An invitation to suppliers to submit a bid for furnishing materials and service needed, in specified quantities, in accordance with MoDOT requirements. The request furnishes the necessary information for the supplier to prepare a bid.

Certification, A document issued by a company wherein they certify that material is in accordance with the specification. Explicit requirements are shown in 106.8 Certifications.

District, One of ten geographical areas of the state of Missouri administered by a District Engineer of MoDOT.

FTMS, Federal Test Method Standards

Material, The substance or substances incorporated in the construction or maintenance of highway structures, bridges and incidentals.

Purchase Order, The notice to a supplier that the bid has been accepted and that the supplier may proceed to deliver the material or perform the service specified in the bid request. The purchase order further informs MoDOT personnel to proceed with inspection, if required and acceptance.

Quotation, A statement, in writing, by a supplier that materials or services needed by MoDOT will be supplied at a certain price.

Refer to Sec 101 for any abbreviation or definition not listed above.

Subcategories

This category has only the following subcategory.