Difference between revisions of "903.23 Laboratory Testing Guidelines for Sec 903"
m (→903.22.2 Sample Record: updated link) |
m (→903.22.1 Procedure: added link) |
||
| Line 6: | Line 6: | ||
===903.22.1.1 Bolts, Nuts and Washers=== | ===903.22.1.1 Bolts, Nuts and Washers=== | ||
| − | Chemical tests, consisting of mass of coating, shall be determined according to AASHTO M232. Chemical analysis of the base metal shall be determined, when requested, according to [[:Category:1020 Corrugated Metallic-Coated Steel Culvert Pipe, Pipe-Arches and End Sections#1020.8.1.1 Chemical Tests|EPG 1020.8.1.1 Chemical Tests]]. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through SiteManager. | + | Chemical tests, consisting of mass of coating, shall be determined according to AASHTO M232. Chemical analysis of the base metal shall be determined, when requested, according to [[:Category:1020 Corrugated Metallic-Coated Steel Culvert Pipe, Pipe-Arches and End Sections#1020.8.1.1 Chemical Tests|EPG 1020.8.1.1 Chemical Tests]]. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through [http://wwwi/intranet/cm/siteManager.htm SiteManager (SM)]. |
| − | Physical tests shall be conducted according to [[:Category:712 Structural Steel Construction#712.3.2.2 Physical Tests - Bolts and Nuts|EPG 712.3.2.2 Physical Tests - Bolts and Nuts]]. Original test results and calculations shall be recorded through | + | Physical tests shall be conducted according to [[:Category:712 Structural Steel Construction#712.3.2.2 Physical Tests - Bolts and Nuts|EPG 712.3.2.2 Physical Tests - Bolts and Nuts]]. Original test results and calculations shall be recorded through SM. |
===903.22.1.2 Polyurethane Foam=== | ===903.22.1.2 Polyurethane Foam=== | ||
| Line 17: | Line 17: | ||
:(b) Density - ASTM D1622 | :(b) Density - ASTM D1622 | ||
| − | Original test results and calculations shall be recorded through | + | Original test results and calculations shall be recorded through SM. |
===903.22.1.3 Structural Steel Welding=== | ===903.22.1.3 Structural Steel Welding=== | ||
| Line 26: | Line 26: | ||
====903.22.1.4.1 Welding Procedure Qualification==== | ====903.22.1.4.1 Welding Procedure Qualification==== | ||
| − | Original test results and calculations shall be recorded through | + | Original test results and calculations shall be recorded through SM. Groove weld tests required for procedure qualification for welding aluminum plate and pipe are as follows: |
:(a) Tests required for thickness of 1/16 in. to and including 3/8 in. are: | :(a) Tests required for thickness of 1/16 in. to and including 3/8 in. are: | ||
| Line 48: | Line 48: | ||
====903.22.1.4.2 Welder (Performance) Qualification==== | ====903.22.1.4.2 Welder (Performance) Qualification==== | ||
| − | Original test results and calculations shall be recorded in | + | Original test results and calculations shall be recorded in SM. Tests required for performance qualification for welding aluminum plate and pipe are as follows: |
:(a) Groove weld tests required for performance qualification of various thicknesses of aluminum are shown under (1), (2) and (3) below. The tests listed are for aluminum plate. If welded aluminum pipe is being tested, the number of tests shown shall be doubled. | :(a) Groove weld tests required for performance qualification of various thicknesses of aluminum are shown under (1), (2) and (3) below. The tests listed are for aluminum plate. If welded aluminum pipe is being tested, the number of tests shown shall be doubled. | ||
Revision as of 14:01, 30 August 2010
This article establishes procedures for Laboratory testing and reporting samples of material used for installation of highway signing including nuts, bolts, washers, polyurethane foam and specimens for welder qualifications.
Contents
903.22.1 Procedure
903.22.1.1 Bolts, Nuts and Washers
Chemical tests, consisting of mass of coating, shall be determined according to AASHTO M232. Chemical analysis of the base metal shall be determined, when requested, according to EPG 1020.8.1.1 Chemical Tests. Original test data and calculations shall be recorded in Laboratory workbooks. Test results shall then be recorded through SiteManager (SM).
Physical tests shall be conducted according to EPG 712.3.2.2 Physical Tests - Bolts and Nuts. Original test results and calculations shall be recorded through SM.
903.22.1.2 Polyurethane Foam
Tests on samples of polyurethane foam shall be conducted in accordance with the following methods:
- (a) Compressive Strength - ASTM D1621
- (b) Density - ASTM D1622
Original test results and calculations shall be recorded through SM.
903.22.1.3 Structural Steel Welding
Samples of structural steel welding shall be tested in accordance with EPG 712.3.2.3 Structural Steel Welding.
903.22.1.4 Aluminum Welding
Tests shall be performed in accordance with Section IX of the ASME Boiler and Pressure Vessel Code.
903.22.1.4.1 Welding Procedure Qualification
Original test results and calculations shall be recorded through SM. Groove weld tests required for procedure qualification for welding aluminum plate and pipe are as follows:
- (a) Tests required for thickness of 1/16 in. to and including 3/8 in. are:
- Two root bend,
- Two face bend and
- Two reduced section tensile tests.
- (b) Tests required for thickness over 3/8 in. but less than 3/4 in. are:
- Two root bend,
- Two face bend and
- Two reduced section tensile tests.
- Four side bend and
- Two reduced section tensile tests.
- (c) Tests required for thickness of 3/4 in. or over are:
- Four side bend and,
- Two reduced section tensile tests.
Fillet welds are not required for procedure qualification of aluminum welding.
903.22.1.4.2 Welder (Performance) Qualification
Original test results and calculations shall be recorded in SM. Tests required for performance qualification for welding aluminum plate and pipe are as follows:
- (a) Groove weld tests required for performance qualification of various thicknesses of aluminum are shown under (1), (2) and (3) below. The tests listed are for aluminum plate. If welded aluminum pipe is being tested, the number of tests shown shall be doubled.
- (1) Tests required for thickness of 1/16 in. to and including 3/8 in. are:
- One root bend and
- One face bend test.
- (2) Tests required for thickness over 3/8 in. but not less than 3/4 in. are:
- One root bend and
- One face bend test.
- or
- Two side bend tests.
- (3) Test required for thickness of 3/4 in. and over are:
- Two side bend tests.
- (b) Fillet weld specimens for performance qualification consist of two macroetch and one fracture specimen cut from 3/16 in. to 3/8 in. welded aluminum plate. The test specimens shall be evaluated as follows:
- (1) The two macroetch test specimens are inspected for:
- Fusion,
- Fillet size and
- Profile.
- (2) The fracture test specimen, when bent flat upon itself, shall not fracture or if it does fracture the fractured surfaces shall be inspected for:
- Surface cracks,
- Root fusion and
- Gas pockets.
903.22.2 Sample Record
Test results for bolts, nuts, washers, and polyurethane foam shall be documented on the appropriate templates in SiteManager. The sample record is to indicate acceptance, qualified acceptance or rejection. Appropriate remarks, as described in EPG 106.20 Reporting, are to be included in the remarks to clarify conditions of acceptance or rejection.
Procedure qualification test results for welds shall be reported through SiteManager. Welder qualification test results are also reported through SiteManager.
Current welder qualification status is maintained in SiteManager by Bridge Engineering.
