Difference between revisions of "Category:620 Pavement Marking"

Latest revision as of 09:11, 15 June 2017

		Divided Highways	Undivided Highways	Intersection Markings
Contractor Installations	Major Roads	High Build Paint with Type L Beads	High Build Paint with Type L Beads	Durable Intersection Marking Material
Contractor Installations	Minor Roads	Not applicable	Waterborne Paint with Type P Beads	Durable Intersection Marking Material

MoDOT Installations	Major Roads – shall be striped annually unless retroreflectivity exceeds requirements for new pavement markings¹	Waterborne Paint with Type L beads (60° and rising)	Waterborne Paint with Type PM beads (60° and rising)	Durable Intersection Marking Material, preformed thermoplastic or waterborne paint with Type PM beads
	Regionally Significant Roads – shall be striped annually unless retroreflectivity exceeds requirements for new pavement markings¹	Not applicable	Waterborne Paint with Type PM beads (50° and rising) or Cold weather paint with Type PM beads (35° to 50°)
	Minor Roads≥400 AADT – maximum of 50% striped annually
	Minor Roads<400 AADT – maximum of 33.3% striped annually
	Surface Treatments
¹ See Pavement Marking Acceptance Table

Guidance for the Selection and Use of Durable Intersection Markings

The following 14 pages are in this category, out of 14 total.

Revision as of 09:10, 15 June 2017 (view source) EPGsysop (talk \| contribs) (Per TS, updated guidance to reflect new materials available and updated retroreflectivity requirements for acceptance.) ← Older edit		Latest revision as of 09:11, 15 June 2017 (view source) EPGsysop (talk \| contribs) m
Line 55:		Line 55:


−	[[image:620 decision 2017.jpg\|center\|~~900px~~]]	+	[[image:620 decision 2017.jpg\|center\|950px]]