Main Page
| HELPFUL EPG VIDEOS: | •Logging into the EPG | |
| •Finding Info in the EPG | ||
| •Article History & How to Receive EMails When Articles are Revised |
| RECENT POLICY CHANGES IN THE EPG | |||||||||||||||||||||||||||
MoDOT has made great strides to build a good transportation system and increase taxpayers' trust in its ability to deliver what was promised. Innovative concepts, such as Practical Design and design-build, were used to deliver those commitments and have made MoDOT a leader in the transportation industry. These forward-thinking, innovative concepts are reflected in the ENGINEERING POLICY GUIDE (EPG). This document provides a single reference for all engineering and engineering-related guidance by combining the former Right of Way, Design, Bridge, Construction, Traffic and Maintenance manuals. MediaWiki, the engine behind the Wikipedia on the World Wide Web, is the software delivering the EPG. Millions of hits on the EPG endorse this format to be easy to navigate and pleasing to read. A small HELP ARTICLE is included to assist with helpful hints on how to use the EPG as well as other points of interest.  
|
Conveyance Document 11/14/12: The Full Disclosure Clause in EPG 236.5.21.6 Full Disclosure Clause was updated. Flat Plate Expansion Devices 11/13/12: In EPG 751.13.5.1, general guidance was added. Also, a Bridge standard drawing table in EPG 751.13.5.4 replaced numerous figures and further serves as detail references. 11/8/12: Guidance on spreadsheet security messages was added to this QRG. New Article, EPG 141.8 Sponsorship Programs 11/7/12: Sponsorsed programs utilize resources from third party entities to fund and support transportation-related projects. This new article meets an FHWA directive. Camber at 7 days and 90 days for P/S Girder Design 11/7/12: Guidance in EPG 751.10.1.11 Slab Elevations, EPG 751.22.2.5 Deformations, EPG 751.22.3.8 Camber, Haunching and Girder Steps and EPG 751.50 H2c6.1 was clarified on estimating the camber at 7 days and 90 days for P/S girder design. "Design camber" was defined in EPG 1029.2.13 Inspection of Completed Members. The estimated camber at 7 days has never been included on bridge plans and this estimate should be on every set of PSI girder bridge plans. QC/QA for Project Estimates 11/7/12: The requirements for review of the project estimate files were changed in EPG 124.1 Quality Control / Quality Assurance for Project Estimates. The responsibility of conducting QAs is now on the district, not the Design Liaison. This revision reflects current practice. New HEC-18 Guidance for Minimum Scour Design Frequencies 11/6/12: Numerous revisions to EPG 750.3 Bridges reflect the new scour information from the new edition of FHWA's HEC-18. Also EPG 751.50 Standard Detailing Notes E1 and E3 and EPG 206.4 Construction Inspection Guidelines for Sec 206 were clarified to be consistant with current practices and practical design 11/6/12: Missouri has not passed a primary seat belt law, but many local entities are doing so within their jurisdiction. MoDOT has now provided signs and a standard method. Removal of Expansion Device Movement Gauge Notes and Details 11/1/12: Movement gauge details (all of EPG 751.12.2.11 and EPG 751.50 notes H11.24, H11.25 and H11.26) were removed. Because inspectors were finding their plates bent upwards, it was decided to no longer require these notes and details. Gap measurements will still be measured and recorded with corresponding temperature for tracking purpose. Engineering Professional Services, Consultant Qualifications 11/1/12: Guidance was added to EPG 134.1.3, #6 Bridge Consultants Only that the Bridge Experience Profile and Personal Bridge Experience Record forms must be updated every 3 years. Missouri Welcome Center Affiliates Sign 11/1/12: Guidance for where this sign is allowed was expanded in EPG 903.10.6 Missouri Welcome Center Affiliates. Emergency Reference Markers 11/1/12: Guidance was added to EPG 903.9.4 Emergency Reference Markers for sign use on non-interstate freeways and expressways and sign use for overlapping routes. Truck-Mounted Attenuator Training 10/31/12: EPG 612.4 Truck-Mounted Attenuator Training now presents the latest guidance. The main addition to the article was info about equipment/materials stored in the bed of the host vehicle. 10/29/12: This article has been generally revised for greater clarification. Equipment/Materials Stored in Bed of Host Vehicle 10/29/12: In EPG 612.1 Truck- and Trailer-Mounted Attenuators, guidance was added about hauling material in the back of a vehicle with a TMA. Consultant Contract Negotiation, Basis of Payment 10/25/12: In EPG 134.3.5 Basis of Payment, the mileage reimbursable rate was changed from the IRS rate to GSA's current POV Mileage Reimbursable Rate. Replacing, Maintaining or Modifying the Placement of a Warning Sign 10/23/12: A statement was added reiterating useful Table 903.6.6 Guidelines for Advance Placement of Warning Sign information for the districts. Request for Transfer of Inspected Materials 10/22/12: This form has been updated in EPG 101 Standard Forms, Materials Related. TA-10a, Flagger Assistance Devices (AFAD) with Red and Amber Signal System 10/18/12: TA-10a was updated to correctly show that the maximum distance between AFADs is 1/2 mile. 10/18/12: This QRG has had a major revision. Acceptance Sampling and Testing Procedures 10/18/12: The Federal Aid Sampling and Testing (FAST) table was split. The "Stabilized Permeable Base" information was moved to EPG 302.2.1.1 and the "Modified Subgrade" information was moved to EPG 205.2.2.3.7. This revision is a result of switching from project-based to system-based Independent Assurance and of going to a QC/QA sampling and testing approach on MoDOT roads. FAST guidance in EPG 123.3.3 was also revised. EPG 134.3.4 Audit Pre-Negotiation Review 10/16/12: A helpful clarification was added to copy Pre-Audit information to Design and/or Bridge Liaisons. Moving Superstructure Slab Bars 10/15/12: In EPG 751.10.1.7 and EPG 751.10.2.2 added details and in EPG 751.50 E3 added notes indicating slab bars that may be moved for construction purposes and showing bar clearance to top mat of slab steel info not given before. Revisions will make tying barrier bars simpler. Consultant Performance Appraisals 10/12/12: In EPG 134.5.4 Consultant Performance Appraisals and EPG 136.4.3.3 Consultant Performance Appraisals, guidance was clarified for both MoDOT and LPA personnel on how to document consultant evaluations. EPG 1039.2.4.2 Sampling of Epoxy Polymer Concrete 10/12/12: Guidance for the sampling frequency has been revised to bring it in line with current practices. |
||||||||||||||||||||||||||
