Category:620 Pavement Marking

Nonstandard JSPs available for pavement marking include:
	Bid Items Grooved Pavement Systems
	Contrast Pavement Marking Epoxy
	Contrast Pavement Markings High Build
	Epoxy Wet Reflective Pavement Markings
	Grooving for Pavement Markings
	High Build Wet Reflective Pavement Markings

Pavement Marking Management System

Summary 2003

See also: Innovation Library

Pavement Marking Guidelines

		Divided Highways		Undivided Highways
		Lane Lines	All Other Markings	All Markings
Contractor Installations	Major Roads	Grooved in wet reflective system using either epoxy or high build paint. Contrast markings on concrete. Minimum initial readings of 450 mcd/m²/lux required	Waterborne paint with type P beads on “rumble stripes”	Waterborne paint with type P beads on “rumble stripes”
	Major Roads		Wet reflective paint system on “flat” lines	Wet reflective paint system on “flat” lines
	Minor Roads	Waterborne paint with type P beads	Waterborne paint with type P beads	Waterborne paint with type P beads
	Intersection Markings	Type 2 tape, preformed thermoplastic or waterborne paint
MoDOT Forces	Major Roads – shall be striped by Memorial Day unless there is a performing durable marking	Waterborne paint with type PM beads	Waterborne paint with type PM beads	Waterborne paint with type PM beads
	Regionally Significant Roads – shall be striped annually	Waterborne paint with type PM beads	Waterborne paint with type PM beads	Waterborne paint with type PM beads
	Other Minor Roads – maximum of 50 percent striped annually	Waterborne paint with type PM beads	Waterborne paint with type PM beads	Waterborne paint with type PM beads
	Intersection Markings	Type 2 tape, preformed thermoplastic or waterborne paint
	Surface Treatments	Waterborne paint with type PM beads	Waterborne paint with type PM beads	Waterborne paint with type PM beads

The following 14 pages are in this category, out of 14 total.