Difference between revisions of "Main Page"

From Engineering_Policy_Guide
Jump to navigation Jump to search
m (EPG 643.2)
m (EPG 701)
Line 74: Line 74:
  
 
|valign="top" cellspacinepgg="0" cellpadding="5" style="border: 1px solid #FFA500; background:#ffdead"|
 
|valign="top" cellspacinepgg="0" cellpadding="5" style="border: 1px solid #FFA500; background:#ffdead"|
 +
'''[[:Category:701 Drilled Shafts|EPG 701 Drilled Shafts]]'''
 +
 +
8/29/14: Guidance was added to clarify why CSL pipes must be filled with water and plugger or capped, as required by Sec 701.4.17.2.1.
 +
 
'''[[643.2 Local Utility Adjustments - Public and Private#643.2.1.13 Federal Cost Participation for Reimbursable Utility Relocations|EPG 643.2.1.13 Federal Cost Participation for Reimbursable Utility Relocations]]'''
 
'''[[643.2 Local Utility Adjustments - Public and Private#643.2.1.13 Federal Cost Participation for Reimbursable Utility Relocations|EPG 643.2.1.13 Federal Cost Participation for Reimbursable Utility Relocations]]'''
  
Line 174: Line 178:
  
 
7/14/14: Updated guidance for FY 2015 Contract Level Course and Seal Coat projects is now available in [[:Category:409 Seal Coat|EPG 409 Seal Coat]] and [[:Category:402 Bituminous Surface Leveling|EPG 402 Bituminous Surface Leveling]]. Each district will need to submit a list of their FY15 Contract Level Course and Seal Coat projects to allow statewide review of the groupings. Also, the PS&E submittal date will be pushed back to July 21, 2014 for the Contract Level Course and Seal Coat projects in the September 19, 2014 bid opening, to allow for revisions to be incorporated.
 
7/14/14: Updated guidance for FY 2015 Contract Level Course and Seal Coat projects is now available in [[:Category:409 Seal Coat|EPG 409 Seal Coat]] and [[:Category:402 Bituminous Surface Leveling|EPG 402 Bituminous Surface Leveling]]. Each district will need to submit a list of their FY15 Contract Level Course and Seal Coat projects to allow statewide review of the groupings. Also, the PS&E submittal date will be pushed back to July 21, 2014 for the Contract Level Course and Seal Coat projects in the September 19, 2014 bid opening, to allow for revisions to be incorporated.
 
'''[[751.5 Standard Details#Mechanical Bar Splices|Mechanical Bar Splices]]'''
 
 
7/10/16: In EPG 751.5.11.1, new guidance specifies the need for additional mechanical bar splices when required in the approach slabs because of stage construction.  Also, new Standard Detailing Notes, [[751.50 Standard Detailing Notes#A3. All Structures|A3.6]] and [[751.50 Standard Detailing Notes#(B1.9.7) Use|B1.9.7]] were added and C.3 Mechanical Bar Splices was deleted.
 

Revision as of 09:53, 29 August 2014

EPG 2013b.jpg


HELPFUL EPG VIDEOS: •Logging into the EPG
•Finding Info in the EPG
•Article History & How to Receive EMails When Articles are Revised
___________
Want help on how to update your EPG guidance?  It is available at EPG Approval Process.
___________
The Electronic MoDOT Spec Book for Mobile Devices is now available


WELCOME
RECENT POLICY CHANGES IN THE EPG
The public showed up at the Upper Elementary School in Rogersville to view the construction timeline and improvements for Project Freeway that will convert Rte. 60 to a freeway around Rogersville.
A contractor crew builds an ADA-compliant sidewalk at Sunshine St. (Rte. D) under Rte. 65 in Springfield.
On U.S. 69 near the Iowa border, Seasonal Maintc. Worker Kevin Gilreath works on bridge deck repairs along with others in his crew.

MoDOT has made great strides to build a good transportation system and increase taxpayers' trust in its ability to deliver what was promised. Innovative concepts, such as Practical Design and design-build, were used to deliver those commitments and have made MoDOT a leader in the transportation industry.

These forward-thinking, innovative concepts are reflected in the ENGINEERING POLICY GUIDE (EPG). This document provides a single reference for all engineering and engineering-related guidance by combining the former Right of Way, Design, Bridge, Construction, Traffic and Maintenance manuals.

MediaWiki, the engine behind the Wikipedia on the World Wide Web, is the software delivering the EPG. Over 20 million hits on the EPG endorse this format to be easy to navigate and pleasing to read. A small HELP ARTICLE is included to assist with helpful hints on how to use the EPG as well as other points of interest.

Sr. Maintc. Worker Curt Holland (center) was awarded a Certificate of Appreciation from Asst. Distr. Engineer Travis Koestner (left) and Distr. Engineer David Silvester. On May, 27, Holland was traveling near Potosi in a boom truck on Rte. 8 when he noticed a motorcycle and a person lying on the ground. Holland called 911 and, during the course of two calls, directed emergency workers to the accident scene. Curt's quick actions likely played a role in saving the motorist's life.
Perhaps you've wondered how many hits the most popular EPG articles have. As of late August, the numbers of hits are:
20. EPG 400, 100577 10. EPG 616, 147270
19. EPG 751.5, 102766 9. EPG 101, 176759
18. EPG 903.6, 102894 8. EPG 600, 180610
17. EPG 134, 105437 7. EPG 616.23, 182196
16. EPG 136.4, 108241 6. EPG 136.12, 184761
15. EPG 751.40, 111022 5. EPG 100, 222803
14. EPG 136.9, 113964 4. EPG 700, 230292
13. EPG 620.2, 114680 3. EPG 900, 248243
12. EPG 903, 127895 2. EPG 751, 279361
11. EPG 200, 143751 1. EPG Main Page, 1683613

EPG 701 Drilled Shafts

8/29/14: Guidance was added to clarify why CSL pipes must be filled with water and plugger or capped, as required by Sec 701.4.17.2.1.

EPG 643.2.1.13 Federal Cost Participation for Reimbursable Utility Relocations

8/29/14: This new subarticle further clarifies and gives additional info for this topic. As a result of this new info, the wording used in Master Reimbursable Utility Agreements (MRUA) has been slightly revised to reference Engineering Policy Guide 643.2.1.44 (instead of 643.2.1.43).

"Phased" Section 106 Process

8/28/14: EPG 135.2 The Section 106 Process for MoDOT Projects was revised to reflect a new agreement with FHWA and others allowing MoDOT to use a “phased” approach to achieve Section 106 compliance.

Outdoor Advertising

8/26/14: Clarifying guidance about grandfathering an extension was added to EPG 236.16.11 Cutout and Extension Process.

Engineering Judgment

8/26/14: A paragraph was added to EPG 900.1.9 Engineering Study and Engineering Judgment's "Guidance" and a sentence removed from EPG 900.1.13 Definitions' "A. Standard" to reflect that FHWA now permits MoDOT to use engineering judgment to modify "shall" conditions.

Standard Detailing Notes

8/25/14: Note I1.67 was updated for greater clarity.

The Professional Land Surveyor's Signature and Seal on Legal Descriptions

8/21/14: Guidance for the PLS signature and seal was clarified in EPG 238.2.17 Professional Land Surveyor Review as well as EPG 236.4.6.2 Methods of Legally Describing the Fee or Portion Thereof.

Box Culvert Quantity Program

8/20/14: This program is now presented in EPG 751.8 LRFD Concrete Box Culverts.

EPG 751.1.2.6.3.3 Roadway Fill

8/18/14: Guidance for the minimum fill over box culverts under roadway has been added.

EPG 903.10.1 Sizes of General Service Signs

8/13/14: General Service Signs have been discontinued. They shall be left in place until they reach the end of their service life.

Land Disturbance Training 2014 and Land Disturbance Tablet Training 2014

8/13/14: In EPG 806.8 Storm Water Pollution Prevention Plan (SWPPP), the Land Disturbance Training 2014, a summarized refresher presentation, was updated. Also, a video, Land Disturbance Tablet Training 2014, is now available for ipad and tablet users.

EPG 750.7.11.1 Minimum Fill Heights

8/12/14: Guidance has been added for minimum fill heights over box culverts. Also, guidance for minimum fill heights over pipes was updated.

Standard Detailing Notes

8/8/14: Note A1.1 was updated for LRFD Seismic Design.

EPG 751.5.3 Hydraulics

8/8/14: Guidance and flood data tables were updated to be consistent with practical design.

EPG 622.2.1 Construction Inspection for Diamond Grinding of Existing Portland Cement Concrete Pavement

8/7/14: MoDOT and MDNR have agreed to a sixth precaution involving dispersal of diamond grinding residue.

EPG 236.5.14 Release of Temporary Easements and Retention Clauses

8/6/14: A fourth method is now available to release temporary easements or retention clauses.

Sidewalks

8/5/14: A new paragraph at the bottom of Maintenance Responsibility clarifies existing policy. Guidance in EPG 642.1.1 Sidewalk Location and Width was revised to reflect the 4 ft. minimum width allowed after approval through the Design Exception process.

Updated QRGs

8/4/14: Two QRGs, Emergency Contacts and Line Item Adjustments, have been updated in EPG 101 Standard Forms.

EPG 902.15 Designing a Traffic Signal

8/1/14: The Signal Design Worksheets spreadsheet is now available.

Standard Detailing Note

7/29/14: The new note, A5.6, will be used for all concrete superstructures where precast panels are used.

EPG 903.4.12 Overhead Sign and Truss Inspection/Inventory

7/29/14: This revison reflects the decision to move sign truss inspection responsibility to Bridge. There is no approved inspection frequency at this time.

EPG 203 Compacting in Cut

7/25/14: The extent of cut compaction has been extended to include unclassified material areas that fit the description of Class A material.

Design Exception Process

7/21/14: In EPG 131.1.5.1 Safety Related Features, AASHTO's Highway Safety Manual analysis has been clarified.

Standard Detailing Note B3.33

7/21/14: In EPG 751.50, Note B3.33 was added stating the maximum actual weight of corrugated steel stay in place forms used for girder loading. The weight of stay in place corrugated forms was not included on plans before, but since the depth of these forms is to be designed by manufacturer, the assumed weight of these forms for girder loading is given as a limit.

EPG 236.3.7.3 Contents of Clearance Certification

7/16/14: The copy of the estimate captioned "Acquisition Complete" is no longer to be attached to the certification when the project is certified clear.

FY 2015 Contract Level Course and Seal Coat Projects

7/14/14: Updated guidance for FY 2015 Contract Level Course and Seal Coat projects is now available in EPG 409 Seal Coat and EPG 402 Bituminous Surface Leveling. Each district will need to submit a list of their FY15 Contract Level Course and Seal Coat projects to allow statewide review of the groupings. Also, the PS&E submittal date will be pushed back to July 21, 2014 for the Contract Level Course and Seal Coat projects in the September 19, 2014 bid opening, to allow for revisions to be incorporated.