Main Page
| HELPFUL EPG VIDEOS: | •Logging into the EPG | •Finding Info in the EPG | |
| •Article History & How to Receive EMails When Articles are Revised | |||
| ___________ | |||
| Want help on how to update your EPG guidance? It is available at EPG Approval Process. | |||
| ___________ | |||
| The Electronic MoDOT Spec Book for Mobile Devices is now available. You may also sign up for E-Update notices. To receive notices regarding Engineering Policy Revisions, select "Engineering Policy" then mark the appropriate subjects of interest. | |||
| RECENT POLICY CHANGES IN THE EPG | |||||||||||||||||||||||||||||||||||
MoDOT has made great strides to build a good transportation system and increase taxpayers' trust in its ability to deliver what was promised. Innovative concepts, such as Practical Design and design-build, were used to deliver those commitments and have made MoDOT a leader in the transportation industry. These forward-thinking, innovative concepts are reflected in the ENGINEERING POLICY GUIDE (EPG). This document provides a single reference for all engineering and engineering-related guidance by combining the former Right of Way, Design, Bridge, Construction, Traffic and Maintenance manuals. MediaWiki, the engine behind the Wikipedia on the World Wide Web, is the software delivering the EPG. Over 30 million hits on the EPG endorse this format to be easy to navigate and pleasing to read. A small HELP ARTICLE is included to assist with helpful hints on how to use the EPG as well as other points of interest.
|
Route Surveying of Stream Crossings 11/18/15: EPG 238.3.36.3.7 Valley Sections was updated to more closely reflect guidance in HEC-RAS user manual. Guidance for valley sections at stream junctions was also added. In EPG 238.3.36.3.17 Multiple Structures, guidance on Major Streams was replaced with guidance for Multiple Structures (in the same floodplain). 11/19/15: Proposed revisions to engineering policy are now submitted using the Engineering Policy Revision Request Form. The proposals will be categorized by the Innovation Engineer based on several guidelines. EPG 1032 Precast Concrete Flared End Sections 11/17/15: Guidance has been updated to allow a concrete pipe manufacturer to use steel fibers in concrete flared end sections instead of standard reinforcing steel. 11/6/15: DBE Goals will now be set by project managers or contract administrators on on-call contracts. This replaces the statewide programmatic goal of 13.5% and provides a level playing field for all on-call consultants in the utilization of DBEs. 11/4/15: This article has been generally clarified. EPG 127.25 Maintenance Environmental Policies 10/28/15: Many links were updated along with numerous clarifications. Alternative Location Proposals 10/27/15: In EPG 236.10.7.3 Alternative Location Proposals, EPG 235.3.4 Right of way as well as the Letter Advertising a Public Hearing, guidance for alternative location proposals has been clarified to reflect current statewide practices. EPG 127.25.8.2 Lead Mining Chat and EPG 127.22 Off-Site Borrow, Spoil, and Staging Areas 10/23/15: New EPA regulation, applying to 4 counties in SW Missouri, facilitates environmental cleanup. EPG 238.2.18.6 Recording the Location Survey Plan 10/22/15: The process to complete location survey plan was revised. A reminder mechanism was created to help avoid delays to recording the location survey plans. EPG 236.4.6.3 Types of Realty Acquired and Clauses to be Used in Property Descriptions 10/16/15: Guidance for permanent utility easement clauses has been changed to allow the conveyance of utility easements to the utility prior to completion of the project. Travel Safe Zones 10/15/15: In EPG 907.3.3 Procedure, the Travel Safe Zone procedure was clarified. TM-54 10/15/15: In EPG 106.3.2.54.7 Field Testing, guidance for the preparation of field test mixture samples was brought into conformance with AASHTO T287. EPG 760.4.2 Notification Requirements 10/14/15: Guidance now reflects that information now collected is only what is currently needed by Motor Carriers and Bridge Divisions and clarifies when the info should be submitted. Also, the Bridge Clearance Report form was updated. 10/14/15: Milestone and Perspective information has been revised as a part of the national attention on Monarch butterflies and the general lack of pollinators. EPG 236.3.3 Right of Way Plan Review 10/13/15: Guidance has been updated to eliminate the need to send a copy of the RW estimate when an A-date is requested. It also eliminates sending a copy of the approved RW plans with the requested A-date. EPG 236.3.5.2 Expenditure Accounting 9/22/15: The requirements to process payments for temporary or permanent easements was clarified. EPG 136.3.8.10 Bridge Engineering Assistance Program (BEAP) 9/22/15: Guidance has been updated to conform with new BEAP contract. Mobilization Cost Estimates 9/18/15: Guidance has been added to EPG 618 Mobilization to help districts with project estimates. EPG 941.5 Request by a City to Construct a “WELCOME TO” Monument 9/14/15: Guidance has been provided for the revised approval process for the "WELCOME TO" Monument. Standard Detailing Notes on Bridge Standard Drawings for Prestressed Panels 9/10/15: New references to prestressed truncated end deck panels have been added. EPG 617.1.1 Temporary Concrete Traffic Barrier – Type F 9/9/15: Guidance for Temporary Concrete Traffic Barrier Standard Drawings now reflects recent crash studies. Of particular note, the Midwest State's Regional Pooled Fund Research Program Report TRP-03-113-03 (revised) recommends the design deflection limit for free standing (unpinned) temporary traffic barrier be set at 2 feet. This would reduce instances in which temporary traffic barrier would require pinning. EPG 606.1.3.2 Approved Crashworthy End Terminals 9/9/15: Previously, a contractor would typically choose the cheapest end treatment from the approved list and provide that unit whether it was the best solution or not. For that reason, end treatments are now further subdivided to more closely match the hardware to its intended use, performance, reusability and cost of repair. Determination of the International Roughness Index 9/9/15: Guidance now codifies the intent that no filters may be used to distort the true road profile measurement with an inertial profiler. Airport Requirements 9/9/15: Guidance in EPG 235.8 Airports now details the requirements for Obstruction Evaluation/Airport Airspace Analysis that ensure that FAA filing requirements are met when MoDOT operations impact FAA airspace. EPG 133.4 Snow and Ice Control Operations 9/8/15: Guidance for non-continuous operations routes and plowing was clarified. It has never been intended to meet objectives on the non-continuous treatment routes "as soon as possible". Rather, operations on these routes may be suspended overnight and at times when progress is not being made. |
||||||||||||||||||||||||||||||||||
