Search results

• 127.17 Wetland and Stream Mitigation Banking
  ...ed and constructed prior to project impacts, because there are performance standards for hydrology and vegetation that require time to achieve. ...riction or covenant on the bank property. The district or consultant will design the plans for the site in a similar fashion as designing a standard [[127.1
  14 KB (2,065 words) - 15:03, 23 November 2021
• 902.8 Traffic Control Signals and Hybrid Beacons for Emergency Vehicle Access (MUTCD Chapter 4G)
  '''Standard.''' For a new emergency vehicle signal installation, the emergency entity, city, or other ==902.8.2 Design of Emergency-Vehicle Traffic Control Signals (MUTCD Section 4G.02)==
  14 KB (1,987 words) - 17:25, 31 August 2022
• Category:130 Value Engineering
  ...omewhat more structured, VE and [[:Category:143 Practical Design|Practical Design]] are intended to achieve the same goal. The goal of VE is to build the rig |'''Practical Design'''
  2 members (0 subcategories, 0 files) - 15:55, 1 June 2023
• 238.1 Aerial Mapping and LiDAR Surveys
  ...l or mobile type of collection for the best results. Where a cross country new alignment would be much better suited for aerial platform like a fixed wing ...e following sequential stages must be coordinated between the district and Design Division:
  19 KB (2,822 words) - 12:02, 16 January 2024
• Help Article
  ...uide (EPG) contains MoDOT policy, procedure and guidance for the planning, design, construction and maintenance of roadway and related facilities. It also i ...ations. For example, many EPG “100 General” articles are important to the design and construction of roadway facilities but do not directly correspond to sp
  15 KB (2,262 words) - 15:19, 3 April 2024
• 238.2 Land Surveying
  ...edures will be performed during the preliminary design phase and the final design phase. ...new parcel out of a larger parent tract, for the purpose of conveying the new parcel.
  38 KB (5,959 words) - 11:43, 11 January 2024
• 751.12 Barriers, Railings, Curbs and Fences
  To be found eligible for Federal-aid funding, new roadside safety devices should meet the crash test and evaluation criteria ...climb and increase vehicle stability during redirections when compared to New Jersey shaped barriers. See the following sections for more details on sta
  25 KB (3,684 words) - 13:21, 9 May 2024
• 903.3 Ground-Mounted Sign Supports
  ...unted sign supports shall be crashworthy and meet the latest federal crash standards at the time of installation. ...gn to be seen and function, but also to the functionality of the breakaway design for each type of signpost. Mounting heights are typically listed as “nom
  37 KB (6,028 words) - 13:32, 28 March 2024
• Category:128 Conceptual Studies
  |[[media:128 3R Design Standards (Rural) 2013.docx|3R - Rural Design Criteria]] |[[media:128 3R Design Criteria (Urban) Mar 10.doc|3R - Urban Design Criteria]]
  0 members (0 subcategories, 0 files) - 09:36, 2 February 2024
• Recent Policy Changes in the EPG
  <!-- ADD NEW CONTENT BELOW THIS LINE --> ...een updated to clarify low-tension references are for repairs only and all new installations will be high-tension guard cable. These revisions also includ
  48 KB (6,056 words) - 13:28, 28 May 2024
• 147.3 Job Order Contracting (JOC)
  ...(see list of standard JOCs and links in box below) shall be reviewed by CO Design for compliance and federal reimbursement eligibility, prior to PS&E submitt Contact a Design Liaison for additional guidance.
  29 KB (4,517 words) - 08:01, 10 June 2024
• 237.14 Electronic Design Data Delivery (BIM Deliverables)
  ...ew Connect Edition] to review native .dgn files included in the Electronic Design Data. ==237.14.1 MoDOT and Consultant Electronic Design Data Requirements==
  57 KB (8,795 words) - 10:34, 14 March 2024
• 616.14 Work Zone Safety and Mobility Policy
  * Employing the same basic safety principles used to design permanent roadways. ...guidelines, identifying and communicating issues related to the condition, design and usage of temporary traffic control devices, as well as the set-up, main
  42 KB (6,035 words) - 15:56, 10 October 2023
• 127.8 Hazardous and Solid Waste
  ...ning hazardous and nonhazardous solid wastes are frequently encountered in new right-of-way acquisitions. [[media:126.4.4 Land Uses Typically Associated The MoDOT Design environmental specialist will evaluate project corridors for waste sites, p
  20 KB (2,896 words) - 12:16, 24 November 2021
• 750.7 Non-Hydraulic Considerations
  ...ction of culvert and storm sewer material and appurtenances. The hydraulic design of culverts and other drainage facilities is discussed in other articles un ...two methods of specifying the permissible culvert types dependent upon the design ADT. For most applications, a group of culvert types is specified as descri
  46 KB (6,728 words) - 13:55, 20 May 2024
• 237.9 Submission of Plans and Supporting Documents
  ...he submittal of paper plans is not allowed unless specifically approved by Design. The district will be responsible for uploading the project into WebTranspo * [https://epg.modot.org/forms/general_files/DE/D-12-form.pdf District Final Design Checklist - Form D-12]
  43 KB (6,736 words) - 07:54, 6 June 2024
• 643.3 Policy, Standards and Regulations
  ...ide a high level of mobility for through traffic. They provide the safest design characteristics and are conducive to high operating speeds. Interstates an ...ys in this classification with high traffic volumes may require expressway design criteria. If this is the case, urban criteria is to be used.
  57 KB (8,895 words) - 15:55, 10 October 2023
• Category:172 Maintenance Facility Performance Expectations Environmental Compliance
  For additional information or help, the Design Environmental contact may be called at (573) 526-4778. ...ov/cmsimages/adrules/csr/current/10csr/10c20-7a.pdf Missouri Water Quality Standards]; [https://revisor.mo.gov/main/OneSection.aspx?section=644 Chapter 644 RSMo
  0 members (0 subcategories, 0 files) - 12:54, 14 November 2023
• 127.10 Section 4(f) Public Lands
  ...4(f)'', FHWA Memorandum to Regional Federal Highway Administrator, Albany- New York (March 7, 1983) ...Classification|CE]]) project. Submitting the required information to the Design Division early facilitates compliance with both the National Environmental
  23 KB (3,293 words) - 16:08, 8 February 2024
• 237.4 Plan-Profile Sheets
  ...and vertical alignments are generated using MoDOT’s supported engineering design softare. Duplication of sheets covering the same area is avoided where prac ...from Section 4-10). The radius (arc) definition of curvature is used for new alignment. The chord definition is used only when an existing chord define
  18 KB (2,764 words) - 14:03, 12 March 2021

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)