Category:231 Typical Section Elements for Roadways

From Engineering_Policy_Guide
Revision as of 14:54, 7 December 2016 by Smithk (talk | contribs) (updated D-sheet links)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
231 Photo1 Typical Roadway.jpg
Typical Section Elements
Typical Urban Roadway Sections
4 Lane Major Urban Roadway
4 Lane Minor Urban Roadway
2 Lane Minor Urban Roadway
Typical Rural Roadway Sections (D-Sheets)
Diamond/Directional Ramp, Any AADT (D-50)
Loop Ramp (D-51)
Muti-Lane Ramp (D-53)
2-Lane Major Rural Roadway, a "Super 2" (D-60)
Interstate Roadway (D-61)
Minor Rural Roadway (D-64)
Local Roadway, Low AADT (D-66)
Local Roadway (D-67)


The cross section of a roadway is composed of several distinct parts. They are:

When the selection of widths, slopes and grades for these elements are combined with the function, service level, traffic and anticipated posted speed of the roadway, the basic configuration of the proposed facility is determined. A well-designed facility combines the preferred values for each of these elements in a safe cost efficient manner within the context of the community.

It is important to define two frequently used terms. They are:

  • Roadway: The portion of a highway, including shoulders, for vehicular use. A divided highway has two or more roadways.
  • Travelway: The portion of the roadway for the movement of vehicles, exclusive of shoulders.

To see the relationship of these typical section elements click here.

Articles in "231 Typical Section Elements for Roadways"

The following 8 pages are in this category, out of 8 total.