Search results

• Category:1070 Water
  ...dures for [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] or approving water intended for use in ...ited Specifications#106.3.1 Sampling|EPG 106.3.1 Sampling]] for additional sampling information.
  1 member (0 subcategories, 0 files) - 09:04, 16 September 2021
• Category:1120 Yellow and White Traffic Marking Materials
  ...cting and [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] thermoplastic traffic paint and paint materials used for traffic marking. All sample containers and equipment used in sampling paint and paint materials shall be clean, dry and free of all contaminants.
  0 members (0 subcategories, 0 files) - 12:27, 23 November 2021
• Category:1113 Double Boiled Linseed Oil and Mineral Spirits
  This article establishes procedures for inspecting and sampling mineral spirits for surface sealing of bridge decks and other concrete stru ===1113.2.2 Sampling===
  0 members (0 subcategories, 0 files) - 08:03, 17 September 2021
• Category:1150 Diamond Saw Blades
  This article establishes procedures for inspecting, sampling, and reporting diamond saw blades. The material requirements are set forth ...ll blades on a statewide basis. The particular district(s) responsible for sampling will be notified by letter with a copy to all districts receiving blades.
  0 members (0 subcategories, 0 files) - 11:22, 19 October 2021
• Category:1108 Blades Maintainer and Loader
  ...specting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] and reporting maintainer and loader blades. The material specification re ...nsidering all blades on a statewide basis. The district(s) responsible for sampling will be notified by letter with a copy to all districts which are to receiv
  0 members (0 subcategories, 0 files) - 11:17, 19 October 2021
• Category:1106 Carbide-Tipped Snowplow Blades
  ...specting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] and reporting carbide-tipped snowplow blades. The material specification ...nsidering all blades on a statewide basis. The district(s) responsible for sampling will be notified by letter with a copy to all districts that are to receive
  0 members (0 subcategories, 0 files) - 11:15, 19 October 2021
• Category:1058 Polyethylene Sheeting
  ...specting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] and reporting polyethylene sheeting. Refer to [ Sec 1058] for MoDOT’s ...e material may be accepted on the basis of manufacturer's certification or sampling and testing, if deemed necessary. When a shipment is sampled, the number of
  0 members (0 subcategories, 0 files) - 10:10, 18 October 2021
• Category:1055 Concrete Curing Material
  ...spection, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] and reporting of clear or transparent liquid curing compound, white pigme ..., Tests and Cited Specifications#106.3.1.3 Sampling Supplies|EPG 106.3.1.3 Sampling Supplies]].
  1 member (0 subcategories, 0 files) - 08:01, 28 September 2023
• 902.20 Material Inspection for Sec 902
  ...is to be rejected. The contractor or supplier is to be given the option of sampling for Laboratory testing, if the magnetic gauge test results are within minus
  3 KB (468 words) - 12:43, 27 August 2020
• 901.17 Material Inspection for Sec 901
  ...is to be rejected. The contractor or supplier is to be given the option of sampling for Central Laboratory testing, if the magnetic gauge test results are with ...is to be accepted on the basis of manufacturer's certification and random sampling and testing. The manufacturer's certification is to show typical test resul
  4 KB (592 words) - 15:08, 14 August 2020
• Category:1045 Paint for Structural Steel
  ...specting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] and reporting paint and paint constituents. Refer to [http://www.modot.o All sample containers and equipment used in sampling paint and paint constituents shall be clean and free of all contaminants. T
  3 members (0 subcategories, 0 files) - 15:34, 21 December 2022
• Category:1124 Sodium Chloride
  ...cting and [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] sodium chloride (rock salt) for use as deicing material. The requirements ===1124.2.2 Sampling===
  0 members (0 subcategories, 0 files) - 08:06, 17 September 2021
• Category:1110 Calcium Chloride
  ...dures for [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]], inspecting and reporting calcium chloride to be used for dust laying, st ===1110.2.2 Sampling===
  0 members (0 subcategories, 0 files) - 07:59, 17 September 2021
• Category:1122 Glass Beads
  ...specting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] and reporting glass beads. ===1122.2.2 Sampling===
  0 members (0 subcategories, 0 files) - 08:04, 17 September 2021
• Category:1062 Pull and Junction Boxes
  ...specting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] and reporting pull boxes, junction
  0 members (0 subcategories, 0 files) - 10:49, 19 October 2021
• 903.22 Material Inspection for Sec 903
  ...is to be rejected. The contractor or supplier is to be given the option of sampling for Laboratory testing, if the magnetic gauge test results are within minus ...is to be accepted on the basis of manufacturer's certification and random sampling and testing. The manufacturer's certification is to show typical test resul
  7 KB (1,014 words) - 15:41, 17 December 2021
• Category:1015 Bituminous Material
  ...center>'''[[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|Sampling]] from a truck; Scraping the sample off of a shovel into a sample box'''</c ...specting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]] and accepting bituminous materials at their source and destination, and t
  0 members (0 subcategories, 0 files) - 12:00, 18 February 2022
• Category:106 Control of Material
  ...c 1020|EPG 1020.8 Laboratory Testing Guidelines for Sec 1020]] pertains to sampling metallic-coated steel culvert metal. Additional laboratory testing guideli ...'' are located at [[:Category:106.3.2 Material Inspection Test Methods|EPG 106.3.2 Material Inspection Test Methods]].
  25 members (1 subcategory, 0 files) - 14:17, 18 January 2022
• Category:1017 Slag Cement
  ...specting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]], testing and accepting Slag Cement at the source and destination and esta Keep all sample containers and equipment used in sampling clean and free of moisture or any foreign material. It is important that th
  0 members (0 subcategories, 0 files) - 14:14, 17 July 2023
• Category:1057 Material for Joints
  ...specting, [[106.3 Samples, Tests and Cited Specifications#106.3.1 Sampling|sampling]], testing and reporting materials for joints. Refer to [http://www.modot. ===1057.2.4 Sampling===
  1 member (0 subcategories, 0 files) - 08:57, 18 October 2021

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)