616.8 Typical Applications (MUTCD 6H)

616.8.1 Listing of Typical Applications

Listing of Typical Applications for Maintenance

(TAs for Design and Construction and Materials are also available)

Typical Application Description	TA No.	Maintenance Figure Number
Work Outside of the Shoulder (see EPG 616.7.6)
Work Beyond the Shoulder on Divided and Undivided Highways	TA-1	616.8.1 - MT
Blasting Zone	-	Contact district personnel*
Work on the Shoulder (see EPG 616.7.7 and EPG 616.7.8)
Shoulder Work on Two-Lane Highways with Edgelines	TA-3	616.8.3 - MT
Shoulder Work on Two-Lane Highways without Edgelines	TA-3a	616.8.3a - MT
Shoulder Work on Divided Highways	TA-5	616.8.5 - MT
Work Within the Traveled Way of a Two-Lane Highway (see EPG 616.7.10)
Highway Closure	TA-8	616.8.8 - MT
Closure of Existing Bridges or Non-Traversable Roads	TA-8a	616.8.8a - MT, DECM
Road Closed Beyond Junction Detour	TA-9	616.8.9 - MT, DECM
Lane Closure on Two-Lane Highways With Edgelines Using Flaggers	TA-10	616.8.10 - MT
Lane Closure on Two-Lane Highways Without Edgelines Using Flaggers	TA-10a	616.8.10a - MT
Lane Closure on Two-Lane Highways with Edgelines Using AFAD Red Amber Signal System	TA-10b	616.8.10b - MT
Lane Closure on Two-Lane Highways without Edgelines Using AFAD Red Amber Signal System	TA-10c	616.8.10c - MT
Lane Closure on Two-Lane Highways with Edgelines Using Portable Signal Flagging Device	TA-10d	616.8.10d - MT
Lane Closure on Two-Lane Highways without Edgelines Using Portable Signal Flagging Device	TA-10e	616.8.10e - MT
Side Roads Entering Work Zones	TA-10g	616.8.10g - MT
Lane Closure on Two-Lane Highways Without Edgelines	TA-11	616.8.11 - MT
Lane Closure on Two-Lane Highways With Edgelines	TA-12	616.8.12 - MT
Lane Closure on Two-Lane Highways Without Edgelines Using Traffic Control Signals	TA-12a	616.8.12a - MT
Work in the Center of a Road with Low Traffic Volumes	-	N/A in MoDOT
Surveying Along Centerline of Two-Way Highways without Edgelines	TA-16	616.8.16 - MT
Mobile Operation on Two-Lane Highways with Edgelines	TA-17	616.8.17 - MT
Mobile Operation on Two-Lane Highways without Edgelines	TA-17a	616.8.17a - MT
Centerline-Edgeline Striping on Two-Lane Highways	TA-17b	616.8.17b - MT
Work Within the Traveled Way of an Urban Street (see EPG 616.7.11)
Lane Closure on a Minor Street	-	N/A in MoDOT
Highway Closure	TA-8	616.8.8 - MT
Closure of Existing Bridges or Non-Traversable Roads	TA-8a	616.8.8a - MT, DECM
Work Within the Traveled Way at an Intersection and on Sidewalks (see EPG 616.7.13)
Lane Closure on Near Side of Intersection	TA-21	616.8.21 - MT
Lane Closure of Right Lane on Far Side of Intersection	TA-22	616.8.22 - MT
Lane Closure of Left Lane on Far Side of Intersection	TA-23	616.8.23 - MT
Sidewalk Detour or Diversion	TA-28	616.8.28 - MT
Crosswalk Closures and Pedestrian Detours	TA-29	616.8.29 - MT
Half Road Closure on the Far Side of an Intersection	-	Contact district personnel*
Multiple Lane Closures at an Intersection	-	Contact district personnel*
Closure in the Center of an Intersection	-	Contact district personnel*
Closure at the Side of an Intersection	-	Contact district personnel*
Work Within the Traveled Way of a Multi-Lane, Non-Access Controlled Highway (see EPG 616.7.12)
Lane Closure on Multi-Lane Undivided Highways	TA-30	616.8.30 - MT
Operations in Two-Way Left Turn Lane on Multi-Lane	TA-30a	616.8.30a - MT
Lane Closure Using Two-Way Left Turn Lane on Undivided Highways	TA-31	616.8.31 - MT
Lane Closure on Alternate Passing Lanes	TA-31a	616.8.31a - MT
Lane Closure on Left or Right Lane on Divided Highway	TA-33	616.8.33 - MT
Mobile Operation on a Divided or Multi-Lane Highways	TA-35	616.8.35 - MT
Centerline and/or Lane Line Striping on Multi-Lane, Undivided Highways	TA-35a	616.8.35a - MT
Edgeline Striping on Multi-Lane, Undivided Highways	TA-35b	616.8.35b - MT
Lane Line and or Left Edgeline Striping on Divided Highways	TA-35c	616.8.35c - MT
Right Edgeline Striping on Divided Highways	TA-35d	616.8.35d - MT
Work Within the Traveled Way of a Freeway or Expressway (see EPG 616.7.14)
Lane Closure of Interior Lane on Multi-Lane Highways	TA-37	616.8.37 - MT
Lane Closure of Interior Lane on Multi-Lane Highways for Capacity	TA-38	616.8.38 - MT
Lane Closure of Interior Lane on Multi-Lane Divided Highways	TA-38a	616.8.38a - MT
Lane Closure of Interior Lane on Multi-Lane Divided Highways	TA-38b	616.8.38b - MT
Lane Closure of Interior Lane on Multi-Lane Divided Highways	TA-38c	616.8.38c - MT
Median Crossover for an Entrance Ramp	-	Contact district personnel*
Median Crossover for an Exit Ramp	-	Contact district personnel*
Work in the Vicinity of an Exit Ramp	TA-42	616.8.42 - MT
Work on Ramps	TA-43	616.8.43 - MT
Work in the Vicinity of an Entrance Ramp	TA-44	616.8.44 - MT
Lane Closure at Interchange	TA-44a	616.8.44a - MT
Work in the Vicinity of a Grade Crossing	TA-46	616.8.46 - MT
Excavations with Steel Plate or Back Fill - Undivided Highways	TA-47a	616.8.47a - MT, DECM
Excavations with Steel Plate or Back Fill - Divided Highways	TA-47b	616.8.47b - MT, DECM
Intermediate Lane Closure	TA-48	616.8.48 - MT, DECM
Signs in Narrow Medians	TA-49	616.8.49 - MT, DECM
Begin-End of Project Signing	TA-50	616.8.50 - MT, DECM
Temporary Reversible Lane Using Movable Barriers	-	Contact district personnel*
Sequential Flashing Warning Light (see EPG 616.6.83)
Sequential Flashing Warning Light	-	616.6.83
* These typical applications may require additional guidance with the district and referencing to the MUTCD.

Listing of Typical Applications for Design and Construction and Materials

Legend for the Design and Construction and Materials TAs (TAs for Maintenance are also available)

Typical Application Description	TA No.	Design/Construction and Materials Figure Number
Spacing and Taper Lengths for Work Zone Signs, Channelizers and Concrete Barrier	TA-51	616.8.51 - DECM
Work Outside of the Shoulder (see EPG 616.7.6)
Work Beyond the Shoulder on Divided and Undivided Highways	TA-1	616.8.1 - DECM
Blasting Zone	-	Contact district personnel*
Work on the Shoulder (see EPG 616.7.7 and EPG 616.7.8)
Work on the Shoulder on Divided and Undivided Highways	TA-3	616.8.3 - DECM
Shoulder Work on Divided and Undivided Highways Reduced Lane Widths	TA-5	616.8.5 - DECM
Shoulder Work with Minor Encroachment on Divided and Undivided Highways	TA-6	616.8.6 - DECM
Work Within the Traveled Way of a Two-Lane Highway (see EPG 616.7.10)
Road Closure with a Diversion	TA-7	616.8.7 - DECM
Lane Shift on Two-Lane Roadway	TA-7a	616.8.7a - DECM
Temporary Connection at Terminus of Divided Lane Facilities	TA-7b	616.8.7b - DECM
Highway Closure	TA-8	616.8.8 - DECM
Closure of Existing Bridges or Non-Traversable Roads	TA-8a	616.8.8a - MT, DECM
Road Closed Beyond Junction Detour	TA-9	616.8.9 - DECM, MT
Lane Closure on Two-Lane Road Using Flaggers	TA-10	616.8.10 - DECM
Lane Closure on Two-Lane Road Using Automated Flagger Assistance Devices (AFAD)-Red and Amber Signal System	TA-10a	616.8.10a - DECM
Lane Closure on Two-Lane Road Using Portable Signal Flagging Devices (PSFD)	TA-10c	616.8.10c - DECM
Flagger Control for Resurfacing or Moving Operation One-Lane Two-Way Operation	TA-10d	616.8.10d - DECM
Lane Restriction on Two-Lane Roadway - Vertical Clearance at Bridge	TA-10e	616.8.10e - DECM
Public Road Crossing Another Road Under Construction	TA-10f	616.8.10f - DECM
Side Roads Entering Work Zones	TA-10g	616.8.10g - DECM
Lane Closure on a Two-Lane Road Using Traffic Control Signals	TA-12	616.8.12 - DECM
Portable Traffic Signal, Temporary Traffic Signal and Concrete Barrier Details	TA-12a	616.8.12a - DECM
Estimated Average Peak Hour Signal Delay for Signal Control - One-lane Two-way Operation	TA-12b	616.8.12b - DECM
Work in the Center of a Road with Low Traffic Volumes	-	N/A in MoDOT
Temporary Road Closure	TA-13	616.8.13 - DECM
Truck and Equipment Crossing or Entrance	TA-14	616.8.14 - DECM
Equipment Crossing or Entrance on Divided Highway Truck and Equipment Crossing or Entrance	TA-14a	616.8.14a - DECM
Temporary Median Opening - Truck and Equipment Crossing or Entrance	TA-14b	616.8.14b - DECM
Mobile Operation on Two-Lane Highways	TA-17	616.8.17 - DECM
Centerline-Edgeline Striping on Two-Lane Highways	TA-17a	616.8.17a - DECM
Work Within the Traveled Way of an Urban Street (see EPG 616.7.11)
Lane Closure on a Minor Street	-	N/A in MoDOT
Highway Closure	TA-8	616.8.8 - DECM
Closure of Existing Bridges or Non-Traversable Roads	TA-8a	616.8.8a - MT, DECM
Work Within the Traveled Way at an Intersection and on Sidewalks (see EPG 616.7.13)
Right Lane Closure at Intersection - Work on Near or Far Side	TA-22	616.8.22 - DECM
Right Lane Closure at Intersection - Work on Far Side Only	TA-22a	616.8.22a - DECM
Right Lane Closure at Intersection - Through Lane at Intersection	TA-22b	616.8.22b - DECM
Left Lane Closure at Intersection - Work on Near or Far Side	TA-23	616.8.23 - DECM
Left Lane Closure at Intersection - Work on Far Side Only	TA-23a	616.8.23a - DECM
Half Road Closure on the Far Side of an Intersection	-	Contact district personnel*
Multiple Lane Closures at an Intersection	-	Contact district personnel*
Closure in the Center of an Intersection	-	Contact district personnel*
Closure at the Side of an Intersection	-	Contact district personnel*
Work Within the Traveled Way of a Multi-Lane, Non-Access Controlled Highway (see EPG 616.7.12)
Operations in Two-Way Left Turn Lane on Multi-Lane Undivided Highways	TA-30a	616.8.30a - DECM
Lane Closure Using Center Turn Lane - Lane Shift	TA-31	616.8.31 - DECM
Lane Closure on Alternate Passing Lanes	TA-31a	616.8.31a - DECM
Two-Lane Closure on a 5-Lane Undivided Highway	TA-32	616.8.32 - DECM
Stationary Lane Closure on a Divided Highway	TA-33	616.8.33 - DECM
Lane Closure with a Temporary Traffic Barrier	TA-34	616.8.34 - DECM
Lane Closure with Width and Lane Restrictions	TA-34a	616.8.34a - DECM
Mobile Operation on a Divided or Multi-Lane Highways	TA-35	616.8.35 - DECM
Centerline and/or Lane Line Striping on Multi-Lane, Undivided Highways	TA-35a	616.8.35a - DECM
Work Within the Traveled Way of a Freeway or Expressway (see EPG 616.7.14)
Double Lane Closure on a Freeway	TA-37	616.8.37 - DECM
Interior Lane Closure on a Freeway	TA-38	616.8.38 - DECM
Two Interior Lane Closure on a Freeway	TA-38a	616.8.38a - DECM
Median Crossover on a Divided Highway, Sheet 1 of 2	TA-39	616.8.39, Sheet 1 of 2 - DECM
Median Crossover on a Divided Highway, Sheet 2 of 2	TA-39	616.8.39, Sheet 2 of 2- DECM
Temporary Median Crossover Roadway Design	TA-39a	616.8.39a- DECM
Median Crossover for an Entrance Ramp	-	Contact district personnel*
Median Crossover for an Exit Ramp	-	Contact district personnel*
Work in the Vicinity of an Exit Ramp	TA-42	616.8.42 - DECM
Partial Exit Ramp Closure	TA-43	616.8.43 - DECM
Work in the Vicinity of an Entrance Ramp	TA-44	616.8.44 - DECM
Excavations with Steel Plate or Back Fill - Undivided Highways	TA-47a	616.8.47a - DECM, MT
Excavations with Steel Plate or Back Fill - Divided Highways	TA-47b	616.8.47b - DECM, MT
Intermediate Lane Closure	TA-48	616.8.48 - DECM, MT
Signs in Narrow Medians	TA-49	616.8.49 - DECM, MT
Begin-End of Project Signing	TA-50	616.8.50 - DECM, MT
Temporary Reversible Lane Using Movable Barriers	-	Contact district personnel*
Work in the Vicinity of a Grade Crossing (see EPG 616.7.18)
Work in the Vicinity of a Grade Crossing	-	Contact district personnel*
Sequential Flashing Warning Light (see EPG 616.6.83)
Sequential Flashing Warning Light	-	616.6.83
* These typical applications may require additional guidance with the district and referencing to the MUTCD.

Support. EPG 616.7 contains discussions of typical TTC activities. EPG 616.8 presents typical applications for a variety of situations commonly encountered. The typical applications provided in Chapter 6H of the MUTCD, the state of the practice, along with engineering judgment, was used as the basis of the development of the typical application for the temporary traffic control on the state highway system. For construction projects, EPG 616 presents typical applications for work zones. EPG 616.23 presents typical applications for work performed by MoDOT maintenance personnel.

While not every situation is addressed, the information illustrated can generally be adapted to a broad range of conditions. In many instances, an appropriate TTC plan is achieved by combining features from various typical applications. For example, work at an intersection might present a near-side work zone for one street and a far-side work zone for the other street. These treatments are found in two different typical applications, while a third typical application shows how to handle pedestrian crosswalk closures. For convenience in using the typical application diagrams, Tables 616.3.4 and 616.3.5 are reproduced in this article.

Procedures for establishing TTC zones vary with such conditions as road configuration, location of the work, work activity, duration of work, road user volumes, road vehicle mix (buses, trucks, cars, motorcycles and bicycles), and road user speeds.

In general, the procedures illustrated represent minimum solutions for the situations depicted. Except for the notes (which are clearly classified using headings as being Standard, Guidance, Option, or Support), the information presented in the typical applications can generally be regarded as Guidance.

Option. Other devices may be added to supplement the devices and device spacing may be adjusted to provide additional reaction time or delineation. Fewer devices may be used based on field conditions.

Support. Figures and tables found throughout EPG 616 provide information for the development of TTC plans. Also, Table 616.3.4 is used for the determination of sign spacing and other dimensions for various area and roadway types.

Fig. 616.8 is the legend for the temporary traffic control typical applications. In many of the typical applications, sign spacings and other dimensions are indicated by letters using the criteria provided in Table 616.3.4. The taper lengths are provided in Table 616.3.5.

Most of the typical applications show TTC devices for only one direction.

616.8.2 Legend for Typical Applications

Fig. 616.8.2 Meaning of Symbols on Typical Application Diagrams

616.8.3 Examples of Highways

Divided Highway: Highway with physical separation of traffic in the opposite direction.
Median Separation	Median Separation with Guard Cable	Barrier Wall Separation
Undivided Highway: Highway with no physical separation of traffic in the opposite direction.
Undivided Highway	Multi-lane Undivided Highway	Multi-lane with Turning Lane

Multi-lane with Raised Median

Multi-lane with Paved Narrow Median

616.8.4 Recommended Advance Warning Sign Minimum Spacing

Table 616.3.4

Speed Limit1, mph	Sign Spacing2, ft.
	Undivided Highway	Divided Highway
up to 35	2003	2003
40 to 45	350	500
50 to 55	500	1000
60 to 70	1000	SA-1000 SB-1500 SC-2640
1 Speed limit is based on posted speed limit.
2 Sign spacing may be adjusted, normally by increasing it, to accommodate field conditions and visibility.
3 For urban low speed, minimum recommended spacing in MUTCD is 100 ft.

616.8.5 Recommended Taper Length and Spacing

Table 616.3.5

Speed Limit1, mph	Taper Length2, ft.		Channelizing Spacing 3, ft.
	Shoulder4 (T1)	Lane5 (T2)	Tapers	Buffer/Work Areas
up to 35	70	245	356	406
40 to 45	150	540	406	806
50 to 55	185	660	507	807
60 to 70	235	840	607	1207
1 Speed limit is based on posted speed limit. 2 Taper lengths may be adjusted to accommodate crossroads, curves, intersections, ramps or other geometric features. 3 Channelizer spacing may be reduced to discourage traffic encroachment. 4 Based on 10 ft. shoulder width. 5 Based on 12 ft. lane width. 6 Spacing reduced to 1/2 at intersections. 7 Spacing may be reduced to 1/2 at intersections.