Category:100 GENERAL

From Engineering Policy Guide
Revision as of 08:57, 15 November 2022 by Hoskir (talk | contribs) (Undo revision 52012 by Hoskir (talk) Changed 174 Maintenance Management System to MoDOT)
Jump to navigation Jump to search
101 Standard Forms
102 Bidding Requirements and Conditions
102.1 Construction Inspection Guidance for Sec 102
102.2 Contractor Performance Rating System
103 Award and Execution of Contract
103.1 Bid Opening and Award Process
104 Scope
104.1 Core Team
104.2 Project Scoping
104.3 Timeline
104.4 Completion of Scoping
104.5 Items to be Considered and Addressed
104.6 Project Scoping Checklists
104.7 Scoping Estimates
104.8 Public Involvement in Project Scoping
104.9 Environmental Considerations
104.10 Management Concurrence
104.11 Project Scoping Documentation
104.12 Scope Changes (Scope, Estimate or Fiscal Year)
104.13 Construction Inspection Guidance for Sec 104
105 Control of Work
105.1. Authority and Duties in Contract Administration (Sec 105.1)
105.2. Plans and Working Drawings (Sec 105.2)
105.3. Conformity with Contract Documents (Sec 105.3)
105.4 Coordination of Contract Documents (Sec 105.4)
105.5 Cooperation by Contractor (Sec 105.5)
105.6 Cooperation Between Contractors (Sec 105.6)
105.7 Cooperation With Utilities (Sec 105.7)
105.8 Construction Stakes, Lines and Grades (Sec 105.8)
105.9 Authority and Duties of Resident Engineer (Sec 105.9)
105.10 Inspection of Work (Sec 105.10)
105.11 Unauthorized and Defective Work (Sec 105.11)
105.12 Load Restrictions
105.13 Maintenance of the Work (Sec 105.13)
105.14 Failure to Maintain Roadway or Structure (Sec 105.14)
105.15 Project Acceptance
105.16 Controversies and Claims for Adjustment (Sec 105.16)
105.17 Venue (Sec 105.17)
105.18 Arbitration (Sec 105.18)
105.19 Digital Signatures (Sec 105.19)
105.20 Adjusting Water Service Leads
105.21 Agreement for Shifting State Highway Entrance
105.22 Duties of the District Construction and Materials Engineer
106 Control of Material
106.1 Source of Supply and Quality Requirements
106.2 Local Materials Sources
106.3 Samples, Tests and Cited Specifications
106.3.2 Material Inspection Test Methods
106.4 Plant Inspections
106.5 Storage of Materials
106.6 Handling Material
106.7 Unacceptable Material
106.8 Material Furnished by the Commission
106.9 Buy America Requirement
106.10 Missouri Domestic Products Requirement
106.11 Metric Implementation
106.12 Qualified Lists (QL) and Pre-Acceptance Lists (PAL)
106.13 Quality Control/Quality Assurance
106.14 Proprietary Items
106.15 Pipe Shipping Report Form
106.16 Special Designs and Shop Drawings
106.17 New Product Evaluation
106.18 Technician Certification Program
106.19 Materials Acceptance
106.20 Reporting
106.21 Summary of Materials Inspected
106.22 Material Inspection Revisions
106.23 Online Research Publications (Research Publications)
106.24 Purchase Order Items
107 Legal Relations and Responsibility to the Public
107.1 Laws to be Observed
107.2 Permits, Licenses and Taxes
107.3 Patented or Copyrighted Devices, Material and Processes
107.4 Safety and Sanitary Provisions
107.5 Public Convenience and Safety
107.6 Bridges over Navigable Waters
107.7 Use of Explosives
107.8 Preservation of Monuments and Artifacts
107.9 Forest and Park Protection
107.10 Environmental Protection
107.11 Responsibility for Claims for Damage or Injury
107.12 Contractor's Responsibility for Work
107.13 Insurance Requirements
107.14 Third Party Liability
107.15 Personal Liability of Public Officials
107.16 Contractors That Are Not Resident In Missouri
107.17 Basis of Payment
107.18 Employee Use of Vehicles
107.19 Project Office Upkeep
108 Prosecution and Progress
108.1 Subletting of Contract (for Sec 108.1)
108.2 Notice to Proceed (for Sec 108.2)
108.3 Prosecution of Work
108.4 Progress Schedules
108.5 Labor, Methods and Equipment
108.6 Temporary Suspension of Work
108.7 Contract Time for Completion of the Work
108.8 Liquidated Damages for Failure or Delay in Completing Work on Time
108.9 Signal and Lighting Malfunctions
108.10 Default of Contract
108.11 Termination of Contract for Convenience of the Commission
108.12 Notice to Contractor and Surety
108.13 Termination of Contract for Misconduct
108.14 Determination of Compensation and Contract Time Extension for Excusable, Noncompensable and Compensable Delays
108.15 Suspension of Work Directed by the Engineer
108.16 Project Dates
109 Measurement and Payment
109.1 Measurement of Quantities (for Sec 109.1)
109.2 Scope of Payment (for Sec 109.2)
109.3 Compensation for Altered Quantities (for Sec 109.3)
109.4 Differing Site Conditions and Changes in the Work (for Sec 109.4)
109.5 Force Account (for Sec 109.5)
109.6 Method of Payment (for Sec 109.6)
109.7 Partial Payments (for Sec 109.7)
109.8 Final Acceptance and Payment (for Sec 109.8)
109.9 Retained Percentage (for Sec 109.9)
109.10 Contract Assignment Process - Contract Reassignment to a New Contractor (for Sec 109.10)
109.11 Compensation for Project Delays (for Sec 109.11)
109.12 Change Orders
109.13 Prompt Payment to Subcontractors and Suppliers (for Sec 109.13)
109.14 Price Adjustment for Fuel (for Sec 109.14)
109.15 Price Adjustment for Asphalt Cement
110 State and Federal Wage Rates and Other Requirements
110.1 Wage Rates (Guidance for Sec 110.1)
110.2 Federal-Aid Projects (Guidance for Sec 110.2)
110.3 Prevailing Wages and Records (Guidance for Sec 110.3)
110.4 Work Performed in Adjoining States (Guidance for Sec 110.4)
110.5 Other Requirements
113 Construction Inspection Guidance for Contractor's Claims
121 Project Planning, Prioritization and STIP Commitments
121.1 Public Involvement and Decision-Making
121.2 The Planning Framework for Transportation Decision-Making
121.3 The Statewide Transportation Improvement Program (STIP)
121.4 Quality Assurance / Quality Control for Project Prioritization
121.5 Asset Management
121.6 STIP Amendments
121.7 Program Estimates
122 Aviation
123 Federal-Aid Highway Program
123.1 Discussion
123.2 Construction Inspection Guidelines
123.3 Materials Requirements
124 Quality Control / Quality Assurance (QC/QA)
124.1 Quality Control / Quality Assurance for Project Estimates
124.2 Quality Control / Quality Assurance for Contract Ready Plans
124.3 Quality Assurance Review for Right of Way Activities
125 CADD Services
126 Location Study and Alternatives Analysis
126.1 Location Study Preparation
126.2 Purpose and Need
126.3 Alternatives Analysis
126.4 Attachments to the Location Study
126.5 Location Study Procedures
126.6 Future Considerations
126.7 Glossary of Terms
127 MoDOT and the Environment
127.1 Request for Environmental Services
127.2 Historic Preservation and Cultural Resources
127.3 Community Impact Assessment
127.4 Wetlands and Streams
127.7 Threatened and Endangered Species
127.8 Hazardous and Solid Waste
127.9 Floodplain Management
127.10 Section 4(f) Public Lands
127.11 Farmland Conversion
127.12 Air Quality
127.13 Noise
127.14 National Environmental Policy Act (NEPA) Classification and Documents
127.15 Reevaluation of National Environmental Policy Act (NEPA) Documents
127.16 Wetland and Stream Mitigation
127.17 Wetland and Stream Mitigation Banking
127.18 Job Special Provisions (JSP) and Contract Documents
127.19 Section 404 Clean Water Act for Bridge Demolitions
127.20 Stream Stewardship Trust Fund in-Lieu Fee Mitigation Program
127.21 Federal Emergency Management Agency (FEMA) Flood Buyout Properties
127.22 Off-Site Borrow, Spoil, and Staging Areas
127.23 Negotiated Commitments and Mitigation in the National Environmental Policy Act (NEPA) Process
127.24 Speleological Findings
127.25 Maintenance Environmental Policies
127.26 Environmental Classification
127.27 Guidelines for Obtaining Environmental Clearance for Off-Site Activities
127.28 Planning and Environmental Linkages (PEL) and the National Environmental Policy Act (NEPA)
127.29 Stormwater
128 Conceptual Studies
129 Public Involvement
130 Value Engineering
130.6 Project Manager’s Guide
130.7 Value Engineering Team Leader Guide
131 Other General Procedures
131.1 Design Exception Process
131.2 Proprietary Items and Public Interest Findings
131.4 Design Exception Process
131.5 Proprietary Items and Public Interest Findings
132 Safety
132.1 Material Inspection for Safety
132.2 Construction Inspection Guidelines for Safety Precautions
133 Snow and Ice Control
133.1 Materials for Snow and Ice Control
133.2 Equipment for Snow and Ice Control
133.3 Snow and Ice Control Personnel
133.4 Snow and Ice Control Operations
133.5 Operator’s Guide for Anti-Icing
134 Engineering Professional Services
Engineering Professional Services Guidelines
135 The Section 106 Process
136 Local Public Agency (LPA) Policy
LPA:136.1 Introduction
LPA:136.2 Certification and Training
LPA:136.3 Federal Aid Basics
LPA:136.4 Consultant Selection and Consultant Contract Management
LPA:136.5 Non-Infrastructure
LPA:136.6 Environmental and Cultural Requirements
LPA:136.7 Design
LPA:136.8 Local Public Agency Land Acquisition
LPA:136.9 Plans, Specs and Estimates (PSE)
LPA:136.10 Advertisement for Bid and Project Award
LPA:136.11 Local Public Agency Construction
LPA:136.12 Figures, Glossary and Other Useful Links
LPA:136.13 LPA Policy Changes
137 Construction Inspection Guidance for Records to be Maintained
138 Project Development Chronology
139 Design - Build
140 Encroachments and Items Permitted on MoDOT’s Right of Way
141 Partnership Development
141.1 Cost Share Program
141.2 Missouri Transportation Finance Corporation (MTFC) Loans
141.3 Local Funding Options
141.4 Transportation Improvement Program Amendments
141.5 Dispute Resolution Process
141.6 Acronyms and Definitions
141.7 Transportation Improvement Program Approval
141.8 Sponsorship Programs
142 Missouri One Call System
143 Practical Design
144 Practical Operations
144.5 Pavement Maintenance
145 Transportation Management Systems (TMS)
146 Disadvantaged Business Enterprise (DBE)
147 Innovative Contracting
147.1 Alternative Technical Concepts
147.2 Add Alternate Bidding
147.3 Job Order Contracting (JOC)
147.4 Fixed Price Variable Scope (FPVS) Contracting
148 Accelerated Bridge Construction (ABC)
149 Project Delivery Determination and Initial Risk Assessment
150 Quality Management
151 Administrative Rule Creation or Modification Process
152 Contactor Bonding Responsibilities
153 Agreements and Contracts
153.4 Administrative
153.5 Bridge
153.6 Chief Counsel's Office
153.7 Construction and Materials
153.8 Customer Relations
153.9 Design
153.10 Design – Escrow
153.11 Financial Services
153.12 General Services
153.13 Highway Safety
153.14 Human Resources
153.15 Information Systems
153.16 Maintenance
153.17 Medical Board Employee Benefits
153.18 Motor Carrier Services
153.19 Multimodal
153.20 Right of Way
153.21 Traffic
153.22 Transportation Planning
153.23 Utility
170 Maintenance Activity Planning Guidelines
171 Maintenance Policy and Operations
171.1 Administration
171.2 Buildings and Grounds
171.3 Roadway Maintenance
171.4 Shoulders and Approaches
171.5 Drainage
171.6 Roadsides
171.7 Bridge Maintenance
171.8 Snow and Ice Control
171.9 Environmental
171.10 Traffic Control
171.11 Roadside Appurtenances
171.12 Maintenance Policy History
172 Maintenance Facility Performance Expectations Environmental Compliance
173 Erosion Control for Maintenance Operations
174 MoDOT Management System (MMS)


EPG articles are not referenced as "sections" but as EPG XXX.X (example: EPG 401.3) to avoid confusion with MoDOT specs (which are contractually binding).

Subcategories

This category has the following 48 subcategories, out of 48 total.

1

Retrieved from "https://epg.modot.org/index.php?title=Category:100_GENERAL&oldid=52013"