Pages without language links
Jump to navigation
Jump to search
The following pages do not link to other language versions.
Showing below up to 500 results in range #51 to #550.
View (previous 500 | next 500) (20 | 50 | 100 | 250 | 500)
- 106.13 Quality Control/Quality Assurance
- 106.14 Proprietary Items
- 106.15 Pipe Shipping Report Form
- 106.16 Special Designs and Shop Drawings
- 106.17 New Product Evaluation
- 106.18 Technician Certification Program
- 106.19 Materials Acceptance
- 106.1 Source of Supply and Quality Requirements
- 106.20 Reporting
- 106.21 Summary of Materials Inspected
- 106.22 Material Inspection Revisions
- 106.23 Online Research Publications (Research Publications)
- 106.24 Purchase Order Items
- 106.2 Local Materials Sources
- 106.3.2.10 TM-10, Specific Gravity Coarse Aggregate for Bituminous Mixtures
- 106.3.2.11 TM-11, Static Immersion Stripping Test
- 106.3.2.12 TM-12, Stripping of Bituminous-Aggregate Mixtures, Boil Method for Seal Coats
- 106.3.2.13 TM-13
- 106.3.2.14 TM-14, Soundness Test of Coarse Aggregate - Water-Alcohol Freeze Method
- 106.3.2.15 TM-15
- 106.3.2.16 TM-16
- 106.3.2.17 TM-17
- 106.3.2.18 TM-18, Smolder Resistance of Jute Netting
- 106.3.2.19 TM-19, Measurement of Pavement Surface Texture Depth by the Sand-Patch Method
- 106.3.2.1 TM-1, Alkalinity of Glass Fiber Mat Materials
- 106.3.2.20 TM-20, Measurement of Air, Surface or Bituminous Mixture Temperature
- 106.3.2.21 TM-21, Determination of Cobalt in Tungsten Carbide Inserts
- 106.3.2.22 TM-22, Determination of Percent Open Area of Plastic Filter Cloth
- 106.3.2.23 TM-23, Determination of Equivalent Opening Size of Plastic Filter Cloth
- 106.3.2.24 TM-24
- 106.3.2.25 TM-25, Determination of Chlorine in Chlorinated Rubber and Chlorinated Paraffin
- 106.3.2.26 TM-26, Determination of Calcium Carbonate and Magnesium Carbonate in Lime and Pigment Materials
- 106.3.2.27 TM-27, Determination of Calcium Oxide and Magnesium Oxide in Hydrated Lime
- 106.3.2.28 TM-28
- 106.3.2.29 TM-29, Determination of Nitrogen in Liquid Fertilizers
- 106.3.2.2 TM-2
- 106.3.2.30 TM-30
- 106.3.2.31 TM-31
- 106.3.2.32 TM-32, Determination of Purity of Sodium Chloride
- 106.3.2.33 TM-33
- 106.3.2.34 TM-34, Determination of Phosphorus in Lubricants
- 106.3.2.35 TM-35, Moisture Offset Factor for a Nuclear Gauge
- 106.3.2.36 TM-36, Density of Plastic Portland Cement Concrete by Nuclear Gauge
- 106.3.2.37 TM-37, Apparent Specific Gravity of Fine Aggregate for Bituminous Mixtures
- 106.3.2.38 TM-38, Determination of Dew Point for Structural Steel Painting
- 106.3.2.39 TM-39, Pull-Out Tests on Expansive Mortars
- 106.3.2.3 TM-3
- 106.3.2.40 TM-40, A One-Point Moisture-Density Relations Test for Soils
- 106.3.2.41 TM-41, Density Testing of Bituminous Mixtures with Nuclear Gauges
- 106.3.2.45 TM-45, Determination of Dry Film Coating Thickness Using Magnetic Gauges
- 106.3.2.46 TM-46, Analysis of Cement, Ground Granulated Blast Furnace Slag and Fly Ash
- 106.3.2.46 TM-46, Analysis of Cements and Fly Ashes
- 106.3.2.47 TM-47
- 106.3.2.48 TM-48, Determination of the Purity of Calcium Chloride
- 106.3.2.49 TM-49, Pull-Out Tests on Chemical Bonding Agents
- 106.3.2.4 TM-4
- 106.3.2.50 TM-50, Mechanical Analysis of Extracted Aggregate (Rapid Method)
- 106.3.2.51 TM-51, Determination of Bitumen in Bituminous Paving Mixtures
- 106.3.2.52 TM-52, Determination of Magnesium Chloride in Magnesium Chloride Brine
- 106.3.2.53 TM-53, Determination of Moisture Content of Bituminous Mixtures
- 106.3.2.54 TM-54, Asphalt Cement Content of Bituminous Mixtures by the Nuclear Method
- 106.3.2.55 TM-55, Determination of Calcium, Magnesium and Potassium in Soils
- 106.3.2.56 TM-56, Determination of Sodium Metasilicate (Na2SiO3)
- 106.3.2.57 TM-57, Determination of Manganese and/or Copper in Steel
- 106.3.2.58 TM-58, Determination of Phosphoric Acid (P2O5) in Commercial Fertilizers
- 106.3.2.59 TM-59, Determination of the International Roughness Index
- 106.3.2.5 TM-5
- 106.3.2.60 TM-60, Test of Cellulose and Mineral Fibers for SMA Mixtures
- 106.3.2.61 TM-61, Asphalt Draindown Test Procedure for Stone Mastic Asphalt Mixtures
- 106.3.2.62 TM-62, Prequalification of Dust Suppressants
- 106.3.2.63 TM-63, Determination of Compatibility of Asphalt Release Agents with Hot Asphaltic Concrete
- 106.3.2.64 TM-64, Void Detection and Undersealing Verification Testing of Concrete Pavement with a Falling Weight Deflectometer
- 106.3.2.66 TM-66, Aggregate Sample Reduction
- 106.3.2.67 TM-67, Preparation of Concrete for Use in AASHTO T161 Freeze and Thaw
- 106.3.2.68 TM-68
- 106.3.2.6 TM-6
- 106.3.2.70 TM-70, Glass Bead Tests
- 106.3.2.71 TM-71, Deleterious Content of Aggregate
- 106.3.2.72 TM-72, Sweep Test of Bituminous Surface Treatment Samples
- 106.3.2.73 TM-73, Volume of Voids in Compacted Filler or Fines
- 106.3.2.74 TM-74, Pullout Tests on Epoxy Bonding Agents for Resin Anchor Systems
- 106.3.2.75 TM-75, Determining Segregation Using the Nuclear Density Gauge
- 106.3.2.76 TM-76, Acid Insoluble Residue
- 106.3.2.77 TM-77, Determining the Binder Ignition Aggregate Correction Factor for Mixtures Containing Rap
- 106.3.2.78 TM-78, Los Angeles Abrasion for Lightweight Aggregate
- 106.3.2.79 TM-79, Procedure to Prepare Aggregate to Determine the Plasticity Index
- 106.3.2.7 TM-7, Rebound Hammer for Opening Strength of Full Depth Concrete Pavement Repairs
- 106.3.2.80 TM-80, Measurement of Retroreflectivity by Handheld Retroreflectometers
- 106.3.2.81 TM-81, Specific Gravity and Absorption of Aggregate Using Automatic Vacuum Sealing Method
- 106.3.2.82 TM-82, Concrete Uniformity
- 106.3.2.83 TM-83, Field Estimation of Water Permeability of Compacted Asphalt Paving Mixtures
- 106.3.2.84 TM-84, Pipe Laser Profile Calibration
- 106.3.2.85 TM-85 Determination of Polyphosphoric Acid (PPA) in Performance Graded (PG) Asphalt Binders
- 106.3.2.86 TM-86 Preparation of Samples for Surface Sealer Wet Track Abrasion
- 106.3.2.87 TM-87 No-Pick-Up Time for Tack Coats
- 106.3.2.88 TM-88 Bond Strength Test for Tack Coat
- 106.3.2.89 TM-89 Determination of Aluminum Oxide in High Friction Surface Treatments (HFST)
- 106.3.2.8 TM-8, Photometric Test for Measuring the Brightness of Reflective Sheeting
- 106.3.2.90, Determination of Chemical Components in Asphalt and Non-Asphalt Rejuvenators
- 106.3.2.91 TM-91, Determination of Total Sulfur in Fly Ash by Sodium Carbonate fusion
- 106.3.2.92 TM-92, Determination of Sulfide sulfur by oxidation of blended slag cements
- 106.3.2.94 TM-94 Identification of Penetrating Emulsified Asphalts
- 106.3.2.95 TM-95 Mass Retention of Emulsified Asphalts Subjected to Water Droplets
- 106.3.2.9 TM-9, Resilience of Hot-Poured Elastic Type Joint Sealer
- 106.3 Samples, Tests and Cited Specifications
- 106.4 Plant Inspections
- 106.5 Storage of Materials
- 106.6 Handling Material
- 106.7 Unacceptable Material
- 106.8 Material Furnished by the Commission
- 106.9 Buy America Requirement
- 1060.4 Laboratory Testing Guidelines for Sec 1060
- 1066.4 Laboratory Testing Guidelines for Sec 1066
- 1070.3 Laboratory Testing Guidelines for Sec 1070
- 120.1 Pavements
- 120.2 Shoulders
- 120.3 Bridges
- 120.4 Traffic Control
- 120.5 Roadside Features
- 120.6 Roadsides
- 120.7 Drainage
- 120.8 Welcome Centers
- 120.9 Uninterrupted Traffic Flow
- 121.1 Public Involvement and Decision-Making
- 121.2 The Planning Framework for Transportation Decision-Making
- 121.3 The Statewide Transportation Improvement Program (STIP)
- 121.4 Quality Assurance / Quality Control for Project Prioritization
- 121.5 Asset Management
- 121.6 STIP Amendments
- 121.7 Program Estimates
- 127.10 Section 4(f) Public Lands
- 127.11 Farmland Conversion
- 127.12 Air Quality
- 127.13 Noise
- 127.14 National Environmental Policy Act (NEPA) Classification and Documents
- 127.15 Reevaluation of National Environmental Policy Act (NEPA) Documents
- 127.16 Wetland and Stream Mitigation
- 127.17 Wetland and Stream Mitigation Banking
- 127.18 Job Special Provisions (JSP) and Contract Documents
- 127.19 Section 404 Clean Water Act for Bridge Demolitions
- 127.1 Request for Environmental Services
- 127.20 Stream Stewardship Trust Fund in-Lieu Fee Mitigation Program
- 127.21 Federal Emergency Management Agency (FEMA) Flood Buyout Properties
- 127.22 Off-Site Borrow, Spoil, and Staging Areas
- 127.23 Negotiated Commitments and Mitigation in the National Environmental Policy Act (NEPA) Process
- 127.24 Speleological Findings
- 127.25 Maintenance Environmental Policies
- 127.26 Environmental Classification
- 127.27 Guidelines for Obtaining Environmental Clearance for Off-Site Activities
- 127.28 Planning and Environmental Linkages (PEL) and the National Environmental Policy Act (NEPA)
- 127.29 Stormwater
- 127.2 Historic Preservation and Cultural Resources
- 127.3 Community Impact Assessment
- 127.4 Wetlands and Streams
- 127.7 Threatened and Endangered Species
- 127.8 Hazardous and Solid Waste
- 127.9 Floodplain Management
- 130.6 Project Manager’s Guide
- 130.7 Value Engineering Team Leader Guide
- 131.1 Design Exception Process
- 131.2 Proprietary Items and Public Interest Findings
- 131.4 Design Exception Process
- 131.5 Proprietary Items and Public Interest Findings
- 132.1 Material Inspection for Safety
- 132.2 Construction Inspection Guidelines for Safety Precautions
- 132.2 Missouri's Blueprint - A Partnership Toward Zero Deaths
- 132.4 Highway Safety Plan and Performance Plan
- 133.1 Materials for Snow and Ice Control
- 133.2 Equipment for Snow and Ice Control
- 133.3 Snow and Ice Control Personnel
- 133.4 Snow and Ice Control Operations
- 133.5 Operator’s Guide for Anti-Icing
- 135.1 Guidelines for Good Contractor Relationships
- 135.2 Public Contacts
- 135.3 Inter-Departmental Relations
- 135.4 Required Notices and Posters
- 135.5 Labor Compliance
- 135.6 Equal Employment Opportunity
- 136.10 Construction Authorization and Letting
- 136.12 Reimbursement and Auditing
- 136.13 Glossary
- 136.2 Bridge Soft Match Credit Program
- 136.3 Project Selection and Programming
- 136.5 Agreements
- 136.7 Right of Way and Public Hearings
- 136.8 Preliminary Design
- 141.1 Cost Share Program
- 141.2 Missouri Transportation Finance Corporation (MTFC) Loans
- 141.3 Local Funding Options
- 141.4 Partnership Development Process
- 141.4 Transportation Improvement Program Amendments
- 141.5 Dispute Resolution Process
- 141.6 Acronyms and Definitions
- 141.7 Transportation Improvement Program Approval
- 141.8 Sponsorship Programs
- 144.5 Pavement Maintenance
- 147.1 Alternative Technical Concepts
- 147.2 Add Alternate Bidding
- 147.3 Job Order Contracting (JOC)
- 147.4 Fixed Price Variable Scope (FPVS) Contracting
- 153.10 Design – Escrow
- 153.11 Financial Services
- 153.12 General Services
- 153.13 Highway Safety
- 153.14 Human Resources
- 153.15 Information Systems
- 153.16 Maintenance
- 153.17 Medical Board Employee Benefits
- 153.18 Motor Carrier Services
- 153.19 Multimodal
- 153.20 Right of Way
- 153.21 Traffic
- 153.22 Transportation Planning
- 153.23 Utility
- 153.4 Administrative
- 153.5 Bridge
- 153.6 Chief Counsel's Office
- 153.7 Construction and Materials
- 153.8 Customer Relations
- 153.9 Design
- 171.10 Traffic Control
- 171.11 Roadside Appurtenances
- 171.12 Maintenance Policy History
- 171.1 Administration
- 171.2 Buildings and Grounds
- 171.3 Roadway Maintenance
- 171.4 Shoulders and Approaches
- 171.5 Drainage
- 171.6 Roadsides
- 171.7 Bridge Maintenance
- 171.8 Snow and Ice Control
- 171.9 Environmental
- 230.1 Horizontal Alignment
- 230.2 Vertical Alignment
- 231.1 Median Width
- 231.2 Clear Zones
- 231.3 Lane Width
- 231.4 Shoulder Width
- 231.5 Inslope Grade
- 231.6 Roadside Ditches
- 231.7 Backslope Grade
- 231.8 Bridge Width
- 232.1 Climbing Lanes
- 232.2 Passing Lanes
- 232.3 Two - Way Left - Turn Lanes
- 232.4 Expressways
- 232.5 Freeways
- 233.1 At-Grade Intersections - Driveways and Entrances
- 233.2 At-Grade Intersections with Stop and Yield Control
- 233.3 Roundabouts
- 233.4 At-Grade Intersections with Signal Control
- 234.1 Access to Interstate Highways
- 234.1 Interchange Justification for Interstate Highways
- 234.2 Diamond Interchanges
- 234.3 Directional Interchanges
- 234.4 Single Point Urban Interchanges (SPUIs)
- 234.5 Cloverleaf Interchanges
- 234.6 Diverging Diamond Interchanges
- 236.10 Right Of Way Condemnation
- 236.11 Mediation
- 236.12 Quality Assurance Reviews
- 236.13 Designing Right of Way Plans
- 236.14 Change in Route Status Report
- 236.15 Requests from Cities for Annexations
- 236.16 Outdoor Advertising
- 236.17 Junkyards
- 236.18 Scenic Byways
- 236.1 General Information
- 236.2 Right of Way Organization and Personnel
- 236.3 Administration
- 236.4 Description Writing and Titles
- 236.5 Property Management
- 236.6 Appraisal and Appraisal Review
- 236.7 Negotiation
- 236.8 Relocation Assistance Program
- 236.9 Asbestos Abatement-Removal of Building Improvement
- 237.10 Distribution of Contract Plans
- 237.11 Signing and Sealing
- 237.12 Communication with the Public
- 237.13 Contract Plan File Name Convention
- 237.14 Electronic Design Data Delivery (BIM Deliverables)
- 237.1 Plan Details
- 237.2 Title Sheet
- 237.3 Summary and Tabulation of Quantities
- 237.4 Plan-Profile Sheets
- 237.5 Special Provisions
- 237.6 Project Estimates
- 237.7 Equipment and Materials List
- 237.8 Contract Time
- 237.9 Submission of Plans and Supporting Documents
- 238.1 Aerial Mapping and LiDAR Surveys
- 238.2 Land Surveying
- 238.3 Route Surveying
- 238.4 Construction Surveying
- 320.1 Preliminary Geotechnical Report
- 320.2 Release of Subsurface Information
- 320.3 Drilling Operations
- 320.4 Procedure for Final Sounding
- 320.5 Foundation Investigations
- 320.6 Slide Investigations
- 320.7 Quarantine Regulations
- 321.1 Design of Earth Slopes
- 321.2 Geotechnical Guidelines
- 321.3 Procedures for Estimation of Geotechnical Parameter Values and Coefficients of Variation
- 413.10 Undersealing
- 413.1 Micro-Surfacing
- 413.2 Scrub Seal
- 413.3 Ultrathin Bonded Asphalt Wearing Surface
- 413.4 Bituminous Fog Sealing
- 413.5 Crack Treatment in Bituminous Pavements
- 413.6 Scrub Seal Treatment
- 413.7 Thin Hot Mix Asphalt Overlay
- 413.8 Spot Seal Coating
- 413.9 Fly Coating
- 460.1 Quality Control/Quality Assurance
- 460.2 Pre-Pavement Meeting
- 460.3 Plant Inspection
- 460.4 Paving Equipment
- 460.5 Roadway Inspection
- 460.6 Paving Operations
- 460.7 Mat Problems
- 570.1 Repair of Concrete Surface Failures
- 570.2 Joint and Crack Maintenance
- 570.3 Repair of Buckled Pavement
- 570.4 Repair of Settlements with Bituminous Patches
- 570.5 Mudjacking (Slab Jacking) by MoDOT Maintenance
- 570.6 Preparation of Portland Cement Concrete Surfaces Prior to Resurfacing
- 606.1 Guardrail
- 606.2 Guard Cable
- 606.3 One-Strand Cable - Access Restraint
- 607.1 Applications
- 607.2 Plans
- 607.3 One-Strand Cable - Access Restraint
- 607.4 Maintenance Planning Guidelines for Fences
- 609.3 Material Inspection for Sec 609
- 609.4 Maintenance Planning Guidelines for Cleaning and Reshaping Paved Ditches
- 609.5 Maintenance Planning Guidelines for Repairing Paved Ditches and Slopes
- 609.6 Maintenance Planning Guidelines for Repairing Curbs
- 611.1 Rock Blanket
- 611.2 Revetment
- 611.3 Concrete Slope Protection
- 611.4 Gabions
- 612.4 Maintenance Planning Guidelines for Impact Attenuators
- 614.2 Material Inspection for Sec 614
- 614.3 Laboratory Testing Guidelines for Sec 614
- 614.4 Maintenance Planning Guidelines for Drop Inlets and Storm Sewers
- 614.5 Maintenance of Floodgates
- 616.10 Product Requirements for Temporary Traffic Control Devices, Pavement Marking and Delineation
- 616.11 Traffic Control for Waterways
- 616.12 Work Zone Speed Limits
- 616.13 Work Zone Capacity, Queue and Travel Delay
- 616.14 Work Zone Safety and Mobility Policy
- 616.15 Transit Considerations
- 616.16 Law Enforcement Services
- 616.17 Pavement Edge Treatment
- 616.18 Construction Inspection Guidelines for Sec 616
- 616.19 Quality Standards for Temporary Traffic Control Devices
- 616.1 General (MUTCD Chapter 6A)
- 616.20 Flagger Training
- 616.21 Work Zone Technician Training
- 616.22 Advanced Work Zone Training
- 616.23 Traffic Control for Field Operations
- 616.24 Traffic Control for Non-Motorized Traffic
- 616.25 MoDOT Work Zone Guidelines
- 616.26 Work Zone User Training
- 616.27 MoDOT Fleet Lighting
- 616.2 Fundamental Principles (MUTCD Chapter 6B)
- 616.3 Temporary Traffic Control Elements (MUTCD Chapter 6C)
- 616.4 Pedestrian and Worker Safety (MUTCD Chapter 6D)
- 616.5 Flagger Control (MUTCD Chapter 6E)
- 616.6 Temporary Traffic Control Zone Devices (MUTCD 6F)
- 616.7 Type of Temporary Traffic Control Zone Activities (MUTCD 6G)
- 616.8 Typical Applications (MUTCD 6H)
- 616.9 Control of Traffic Through Traffic Incident Management Areas (MUTCD 6I)
- 616.x Typical Applications January 2023
- 617.1 Temporary Traffic Barriers
- 617.2 Construction Inspection Guidelines for Sec 617
- 617.3 Material Inspection for Sec 617
- 617.4 Laboratory Testing Guidelines for Sec 617
- 617.5 Maintenance Planning Guidelines for Concrete Traffic Barriers
- 620.10 Operational Procedures and Safety
- 620.11 Guidelines for Using Water-Borne Traffic Paint
- 620.12 Construction Inspection for Sec 620
- 620.13 Measurement of Retroreflectivity by Handheld Retroreflectometers
- 620.14 3M Installation Contract
- 620.1 General (MUTCD Chapter 3A)
- 620.2 Pavement and Curb Markings (MUTCD Chapter 3B)
- 620.3 Roundabout Markings (MUTCD Chapter 3C)
- 620.4 Markings for Preferential Lanes (MUTCD Chapter 3D)
- 620.5 Delineators (MUTCD Chapter 3F)
- 620.6 Colored Pavements
- 620.7 Channelizing Devices Used for Emphasis or Pavement Marking Patterns
- 620.8 Islands
- 620.9 Rumble Strip Markings
- 626.1 Edgeline Rumble Strips
- 626.2 Centerline Rumble Strips
- 626.3 Construction Inspection Guidelines for Sec 626
- 626.4 Transverse Rumble Strips
- 626.5 Modified Rumble Strips
- 640.1 Pavement Drainage
- 640.2 Median Drainage
- 641.1 Bicycle Facilities
- 642.10 Curb Ramp Applications
- 642.11 Pedestrian Grade Separations
- 642.12 Pedestrians and Roundabouts
- 642.13 ADA Self-Evaluation
- 642.14 ADA Transition Plan
- 642.1 Integrating Non-Motorized Facilities
- 642.2 Consideration of Pedestrian Facilites on Projects
- 642.3 Americans with Disabilities Act of 1990
- 642.4 Impact of the Project Category on ADA
- 642.5 Maximum Extent Feasible
- 642.6 Local Projects and ADA Considerations
- 642.7 Maintenance Responsibility
- 642.8 Sidewalk Design Criteria
- 642.9 Sidewalk Ramp and Curb Ramp Design Criteria
- 643.1 Utilities - Status and Liability Acceptance
- 643.1 Utilities - Status Letter
- 643.2 Local Utility Adjustments - Public and Private
- 643.3 Policy, Standards and Regulations
- 643.4 Railroads
- 646.1 Manholes
- 646.2 Pipelines
- 646.3 Private Underpasses
- 646.4 Work Funded by Maintenance
- 733 Precast Concrete Box Culverts
- 748.1 Evaluation of Project Impacts
- 748.2 Roadway Design Criteria
- 748.3 Freeboard
- 748.4 Headwater and Backwater
- 748.5 Matching Existing Structures
- 748.6 High Water Surface Elevation
- 748.7 Bridge Deck and Bridge End Drainage
- 748.7 Bridge Reports and Layouts
- 748.8 Development in Floodplains
- 748.9 Legal Aspects of Hydraulic Design
- 750.1 Open Channels
- 750.2 Culverts
- 750.3 Bridges
- 750.4 Storm Sewers
- 750.5 Sanitary Sewers
- 750.6 Erosion Control and Energy Dissipation
- 750.7 Non-Hydraulic Considerations
- 751.0 State Map
- 751.10 General Superstructure
- 751.11 Bearings
- 751.12 Barriers, Railings, Curbs and Fences
- 751.13 Expansion Joint Systems
- 751.14 Steel Superstructure
- 751.17 Concrete Slab Bridges
- 751.18 Concrete Multicell Box Girder Bridges
- 751.1 Preliminary Design
- 751.21 Prestressed Concrete Slab and Box Beams
- 751.22 Prestressed Concrete I Girders
- 751.23 Prestressed Concrete Double Tee Girders
- 751.24 LFD Retaining Walls
- 751.2 Loads
- 751.30 Open Concrete End Bents
- 751.31 Open Concrete Intermediate Bents
- 751.32 Concrete Pile Cap Intermediate Bents
- 751.33 Concrete Semi Deep Abutments
- 751.34 Concrete Pile Cap Non-Integral End Bents
- 751.35 Concrete Pile Cap Integral End Bents
- 751.36 Driven Piles
- 751.37 Drilled Shafts
- 751.38 Spread Footings
- 751.39 Pile Footings
- 751.39 Seal Course
- 751.3 Structural Steel Design Properties
- 751.40 LFD Widening and Repair
- 751.4 Reinforced Concrete Design Properties
- 751.50 Standard Detailing Notes
- 751.5 Structural Detailing Guidelines
- 751.6 General Quantities
- 751.7 General Design Data
- 751.8 LFD Culverts
- 751.8 LRFD Concrete Box Culverts
- 751.9 LFD Seismic
- 770.10 Linseed Oil Treatment
- 770.1 District Routine Maintenance and Special Crew Responsibilities
- 770.2 Regional and Central Office Bridge Maintenance Crew Responsibilities
- 770.3 Cathodic Protection
- 770.4 Navigation Lights/Light Tenders
- 770.5 Posting of Bridge Limits
- 770.6 Bridge Approach Maintenance
- 770.6 Mat Gutter Maintenance
- 770.7 Channel Work - Gabion Installation
- 770.7 Maintenance of Bridge Superstructure
- 770.8 Channel Work - Rock Blanket
- 770.8 Maintenance of Bridge Substructure
- 770.9 Miscellaneous Bridge Maintenance
- 771.10 Bridge Joint Sealing - Hot Pour
- 771.11 Bridge Joint Sealing - Silicone
- 771.12 Bridge Joint Sealing - Polytite
- 771.13 Sealing Abutment and Pier Caps
- 771.14 Spot Painting of Bearings and Piling
- 771.15 Concrete Bridge Deck Sealer Selection Matrix
- 771.16 Penetrating Concrete Sealer - Silane
- 771.17 Concrete Crack Filler - Low Viscosity Polymer (LVP)
- 771.18 In-Deck Bridge Deck Crack Filler
